Overview
Manuals
Motor Duty Match
PSTX Parameter Recovery
Bypass Commissioning
Features:
- The documented abb article number is 1SFA898111R7000, and this value must match the supplied unit.
- The documented type designation is PSTX170-600-70, and this value must match the supplied unit.
- The documented rated operational current is 171 A, and this value must match the supplied unit.
ABB 1SFA898111R7000 PSTX170-600-70 is documented for the applicable Inverter Drives system configuration. Its recorded specification includes abb article number 1SFA898111R7000, type designation PSTX170-600-70, rated operational current 171 A. Correct selection depends on the complete article identity, installed equipment, mechanical or electrical interfaces and the documented configuration rather than appearance alone. Using the exact model helps maintenance teams avoid incompatible revisions, connector arrangements and application variants.
Before installing 1SFA898111R7000 PSTX170-600-70, record the original nameplate, installed position, connected assemblies and every relevant configuration detail. Compare the supplied unit with the existing hardware and applicable ABB service documentation, isolate all affected energy sources and preserve required settings or calibration data. After installation, inspect each affected interface and complete controlled functional checks before returning the equipment to service.
The 1SFA898111R7000 PSTX170-600-70 ABB Inverter Drives is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
ABB 1SFA898111R7000 PSTX170-600-70 documentation and reference links.
Important Notice: Every linked document must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
Select the 171 A unit from the actual motor current, starting duty, starts per hour and ambient derating.
Back up ramp, current-limit, kick-start, protection and fieldbus settings before replacement.
Prove phase order, soft start, bypass transition, stop behavior and protection trips before automatic operation.
