Overview
Manuals
Hardware Configuration
Field Connection
Engineering Considerations
Features:
- ABB AC 800M CI854AK01 3BSE030220R1
- Profibus-dp/v1 communication interface kit in the ABB AC 800M
- It connects AC 800M controllers to PROFIBUS DP networks
The ABB CI854AK01 3BSE030220R1 is a profibus-dp/v1 communication interface kit in the ABB AC 800M. The manufacturer specifies the legacy kit combines a CI854A communication interface with the applicable TP854 baseplate. It connects AC 800M controllers to PROFIBUS DP networks. Its ordering identity combines CI854AK01 with 3BSE030220R1; both references should be checked when selecting a replacement. Engineering confirmation should also cover installed CI854A hardware, controller firmware, PROFIBUS configuration and baseplate and the installed base or terminal hardware before the unit is placed into service.
Values are based on the manufacturer's official ABB AC 800M documentation. Final selection must be verified against the complete article number and installed configuration.
The ABB CI854AK01 3BSE030220R1 PROFIBUS-DP/V1 communication interface kit is supported by Moore Automated for verified industrial replacement and spare-part requirements.
ABB CI854AK01 3BSE030220R1 PROFIBUS-DP/V1 communication interface kit manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
CI854AK01 3BSE030220R1 should be engineered using the official ABB AC 800M documentation, with the stated CI854A PROFIBUS communication matched to the configured signal path.
Before installation, confirm installed CI854A hardware, controller firmware, PROFIBUS configuration and baseplate, the associated base or terminal hardware, and the field-side electrical conditions shown in the manufacturer's instructions.
Use the complete article number when comparing units. Channel configuration, connected equipment and any safety or communication requirements must remain consistent with the verified design.
