Registered Address: 32D Floor Guomao Building, No.388, Hubin South Road, Siming District, Xiamen,Fujian, China
S200-TB2 is an ABB Terminal Block for the documented Advant Controller 250 equipment family. Verified exact-model details include I/O Bus Connector: Female connector; Mounting Hole Diameter: 4.5 mm; Compatible I/O Voltage: 24 V DC; Voltage Rating: 120VAC / 5VDC; Current Rating: 640MA. Selection must match the complete nameplate identity, hardware revision, installed interfaces and receiving-system configuration.
S200-TB2 is an ABB Terminal Block selected by its complete product identity and documented equipment role. Suitability depends on the installed Advant Controller 250 hardware, interfaces and application requirements matching the supplied unit.
Before replacement, record the nameplate, installed position, terminal or connector arrangement and paired assemblies. After installation, verify every affected power, communication, protection, control or I/O function before returning S200-TB2 to service.
ABB S200-TB2 documentation and reference links.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
S200-TB2 performs the documented terminal block function within the Advant Controller 250 system. Confirm the recorded power, signal, communication and mechanical interfaces against the approved equipment record. Do not infer ratings or interchangeability from appearance; the complete label and hardware revision control selection.
Replacement of S200-TB2 requires an exact match to the receiving Advant Controller 250 hardware, connected assemblies and configuration record. Record the installed position and connections before removal, preserve required settings, and verify every affected function after installation.
Before energizing S200-TB2, inspect mounting, connector keying, terminal allocation, protective grounding and paired equipment. After startup, review diagnostics and complete controlled functional tests before returning the equipment to service.
S200-TB2 is documented as an ABB Terminal Block for the Advant Controller 250 equipment family. The documented documented voltage values is 120VAC / 5VDC. The documented documented current values is 640MA. Use these values only with the complete product identity and verified receiving-system record.
Match S200-TB2 to the approved mounting position, terminal or connector arrangement, paired assemblies and configuration record. The documented technical function is Field wiring and module termination. After installation, verify every affected function.
Obsolete / Discontinued by OEM
Moore Automated supplies ABB S200-TB2 Terminal Block units subject to confirmed availability and condition. Every supplied item is inspected before shipment to support stable operation and reduce unplanned downtime.