Overview
Manuals
Hardware Function
System Integration
Commissioning Checks
Features:
- Mounting Method is DIN RAIL and must match the supplied unit.
- Serial Interface is RS-232 and must match the supplied unit.
- Documented Voltage Values is 0.05–120 VAC / 1–5 VDC / 24 VDC / 24–125 VDC / 24–120 VAC / 120 VAC / 125 VDC / +15 VDC and must match the supplied unit.
CPM810 is an ABB common processor module selected by its complete product identity and documented equipment role. Verified technical data includes Mounting Method DIN RAIL; Serial Interface RS-232; Documented Voltage Values 0.05–120 VAC / 1–5 VDC / 24 VDC / 24–125 VDC / 24–120 VAC / 120 VAC / 125 VDC / +15 VDC; Documented Current Values 20 mA / 320 mA / 100 mA / 75 mA / 24A / 3A / 5A / 264 mA; Documented Power Values 4.8 W / 0.5 W / 1.8 W / 6.4 W / 12 W / 16.8 W / 5.0 W / 7.2 W; Documented Frequency Values 0.5–20 kHz / 60 Hz / 40-70 Hz / 25 MHz / 0.01 Hz / 80 MHz / 0.1 Hz / 0-4000 Hz. These values and the complete hardware revision must match the approved receiving-system record rather than appearance alone.
Before installing CPM810, record the original nameplate, position, terminal or connector allocation, paired assemblies and relevant settings. Compare the supplied unit with approved ABB documentation, isolate affected energy sources, preserve grounding and configuration data, and complete controlled diagnostics and functional checks before return to service.
The CPM810 ABB Common Processor Module is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
ABB CPM810 documentation and reference links.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
CPM810 performs the documented common processor module function within the ABB Symphony Plus platform. Verified product data includes Mounting Method DIN RAIL; Serial Interface RS-232; Documented Voltage Values 0.05–120 VAC / 1–5 VDC / 24 VDC / 24–125 VDC / 24–120 VAC / 120 VAC / 125 VDC / +15 VDC; Documented Current Values 20 mA / 320 mA / 100 mA / 75 mA / 24A / 3A / 5A / 264 mA; Documented Power Values 4.8 W / 0.5 W / 1.8 W / 6.4 W / 12 W / 16.8 W / 5.0 W / 7.2 W; Documented Frequency Values 0.5–20 kHz / 60 Hz / 40-70 Hz / 25 MHz / 0.01 Hz / 80 MHz / 0.1 Hz / 0-4000 Hz; Memory Capacity 16 MB / 140 KB / 12 KB. Match the complete product identity and hardware execution to the supplied unit.
Integrate CPM810 only with approved ABB Symphony Plus receiving hardware, connectors or terminals and paired assemblies. Preserve recorded settings and verify every affected interface and diagnostic path after installation.
Before energizing CPM810, inspect mounting, connector keying, wiring allocation, protective grounding and connected equipment. Review status indications and diagnostics, then complete controlled functional tests before service release.
