Fast Quote About Us FAQ Contact Us
  • Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Fast Quote About Us FAQ Contact Us
      Request a Parts Quote
      Name
      Company *
      Phone *
      Email *
      Address
      City
      State / Province / Region
      Zipcode
      Country
      Quantity *
      Part Number *
      Manufacturer
      Preferred Condition
      Additional Information
      Cancel
      Bently Nevada 190501-09-00-04
      Bently Nevada 190501-09-00-04

      • ISO 9001:2015 Certified

        Our quality management system covers sourcing,testing and dispatch

      • View Our Success Stories

        Real stories from real customer orders
      In Stock
      Ships by Tuesday, October 20
      Fast Shipping Available
      Cooling-Tower Velomitor Transducer

      190501-09-00-04

      Product Information:

      190501-09-00-04 is a Bently Nevada Velomitor CT velocity transducer configured with mounting option 09, interface option 00 and multiple-approval option 04.

      Selection requires the complete order code, documented hardware family, dimensions, interfaces and installed-system context. A similar appearance or shared family name does not establish interchangeability.

      Product image is representative; revision or series may vary. Contact us to request a specific version.
      Get a Quote
      • One-year warranty
      • Global shipping
      • Exact-model verification
      WhatsApp: +86 180 2077 6792 Email parts team
      01


      Model Verified

      Model, revision and nameplate reviewed
      02


      Email confirmation

      You will get an email confirming that we have received your enquiry
      03


      Dedicated Account Manager

      One of our team will be in touch to confirm your part(s) specification and condition
      04


      Your quote

      You will receive a comprehensive quote tailored to your specific needs
        • PRODUCT OVERVIEW

          What is this product?

          190501-09-00-04 is a Bently Nevada Velomitor CT velocity transducer configured with mounting option 09, interface option 00 and multiple-approval option 04. In 190501-AA-BB-CC, 09 selects the 3/8-24 to 1/4-inch NPT plate stud, 00 selects the MIL-C-5015 interface, and 04 selects the listed multiple approvals. The full suffix must be retained because the mechanical, cable and approval options are encoded separately.

          Source boundary

          Bently Nevada official datasheet 141636. Ratings and order-code interpretations apply to the exact options listed in the complete model.
        • APPLICATIONS

          Industry applications

          These are industry application contexts for the documented product family. The exact transducer, cable, housing, approvals and machine configuration must be engineered together.

          Power generation

          Turbines, generators, boiler-feed pumps and other critical rotating equipment.

          Oil & gas

          Compressors, pumps, drivers and pipeline machinery in production and transmission.

          Refining & petrochemical

          Process compressors, pumps, steam turbines and machinery-protection loops.

          Metals & mining

          Large motors, mills, gearboxes, fans and conveyor-drive machinery.
      Technical specifications for

      190501-09-00-04

      0 TECHNICAL PARAMETERS
      • Manufacturer:
        Bently Nevada
      • Product Category:
        Sensor
      • Sensitivity:
        100 mV/in/s ±5%
      • Frequency response:
        3-900 Hz ±1 dB
      • Measurement range:
        63.5 mm/s peak (2.5 in/s peak)
      • Mounting adapter:
        Plate stud: 3/8-24 to 1/4-inch NPT
      • Electrical interface:
        MIL-C-5015
      • Approval option:
        Multiple approvals: CSA/NRTL/C and ATEX/IECEx
      • Operating temperature:
        -40 to +85 °C
      • Housing material:
        316L stainless steel
      • Stock Availability:
        3
      Ask for Quote
      WHAT HAPPENS NEXT?

      From enquiry to delivery

      Six clear steps show what information is required and what the written quotation will contain.
      • 01

        Find the product

        Search the part number or send an inquiry for obsolete, discontinued or hard-to-find parts.
      • 02

        Provide the details

        Share the exact part number, quantity, condition, revision, destination and any required certificates or photos.
      • 03

        Review the quotation

        Receive price, currency, condition, availability, warranty, lead time, shipping terms and quotation validity in writing.
      • 04

        Confirm the order

        Accept the quotation in writing and complete the required payment before shipment.
      • 05

        Pay by bank transfer

        Pay the full invoiced amount by bank wire in RMB/CNY, GBP, EUR or USD using the official invoice details.
      • 06

        Verify and dispatch

        The item receives a pre-shipment inspection and suitable protective packaging. Functional testing is performed only where appropriate equipment and procedures are available for the specific item. We confirm the applicable inspection scope and provide tracking after dispatch.
      Request a Verified Quote
      BUYER INFORMATION

      Product condition level information

      Commercial details are confirmed in writing before payment.
      • 01

        Factory Sealed

        Unused product with the original factory seal intact; packaging age or storage marks may still be present.

        view
      • 02

        Original Pack

        Unused product in original manufacturer packaging that was not originally factory sealed.

        view
      • 03

        Factory New

        New and current product sourced through the manufacturer or authorized supply channel when expressly confirmed in the quotation.

        view

      Alternative Names

      Bently Nevada 190501-09-00-04 Cooling-Tower Velomitor Transducer 190501-09-00-04 190501 Velomitor CT 190501090004 190501 09 00 04

      Information

      Overview Manuals Mounting Option Signal Range Approval Option

      Features:

      • Low-frequency velocity transducer developed for cooling towers and air-cooled heat exchangers operating at 90 rpm or faster.
      • Order option 09 selects the documented 3/8-24 to 1/4-inch NPT plate-stud mounting adapter.
      • Option 04 identifies the multiple-approval configuration; the full installation still must comply with the approval drawing.
      190501-09-00-04 is a Bently Nevada Velomitor CT velocity transducer configured with mounting option 09, interface option 00 and multiple-approval option 04. In 190501-AA-BB-CC, 09 selects the 3/8-24 to 1/4-inch NPT plate stud, 00 selects the MIL-C-5015 interface, and 04 selects the listed multiple approvals. The full suffix must be retained because the mechanical, cable and approval options are encoded separately.

      Bently Nevada official datasheet 141636. Ratings and order-code interpretations apply to the exact options listed in the complete model. Accessories and cables are included only when stated in the written quotation.

      Bently Nevada publishes current technical documentation for the 190501 Velomitor CT family. That family documentation does not by itself confirm the manufacturing lifecycle or immediate availability of every configured order string, including 190501-09-00-04.
      Bently Nevada 190501-09-00-04 190501 Velomitor CT official datasheet, Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

      Use the option-09 plate stud and verify the mounting surface, orientation and cable strain relief.

      Match the 100 mV/in/s sensitivity, 3-900 Hz response and 2.5 in/s peak range to the monitor configuration.

      Confirm CSA/NRTL/C and ATEX/IECEx marking on the supplied transducer and follow the applicable hazardous-area drawing.

      Technical notes

      Match the mounting adapter, connector, monitor sensitivity and hazardous-area approval. Prepare a clean, rigid mounting surface and route the cable to avoid flexing or water ingress. The 100 mV/in/s sensitivity and 3-900 Hz frequency response must be reflected in the receiving monitor configuration. After installation, verify bias or health indications, signal polarity, noise, vibration response and alarm behavior.

      Exact Item Verification

      190501-09-00-04 is a Bently Nevada Velomitor CT velocity transducer configured with mounting option 09, interface option 00 and multiple-approval option 04.

      In 190501-AA-BB-CC, 09 selects the 3/8-24 to 1/4-inch NPT plate stud, 00 selects the MIL-C-5015 interface, and 04 selects the listed multiple approvals.

      Request a clear nameplate photograph and compare every option before accepting the replacement.

      Quotation & Installation Check

      Isolate energy, record the installed position and wiring, verify the complete nameplate and connector arrangement, then follow the applicable manufacturer and site procedures.

      No. Match the complete order code, hardware family, dimensions, interfaces and documented options. Appearance or a shared family name is not sufficient evidence of interchangeability.

      State the quantity, receiving country, required date and accessory scope in the enquiry.

      Customs & shipping dimensions / weight

      • Packed shipping dimensions
        Confirmed after final packing
        No official packed dimensions were confirmed; final packed dimensions are measured after protective packing.
      • Packed shipping weight
        Confirmed after final packing
        No official packed weight was confirmed; final gross weight is recorded after packing.
      • HS / customs code
        Confirmed before dispatch
        The customs declarant confirms the destination-specific classification for the supplied item.
      • Country of origin
        USA
        Confirmed from manufacturer documentation and the actual unit nameplate where available
      • Ships from
        Xiamen, Fujian, China
        The dispatch location, quantity and handling time are confirmed in the written quotation.
      • Customs documents
        Confirmed for the destination
        Invoice, packing-list and origin-document requirements are agreed with the order.
      PRODUCT & ORDER FAQS

      Questions buyers ask about 190501-09-00-04

      • Which documented specifications define the exact 190501-09-00-04 configuration?

        Sensitivity: 100 mV/in/s ±5%; Frequency response: 3-900 Hz ±1 dB; Measurement range: 63.5 mm/s peak (2.5 in/s peak); Mounting adapter: Plate stud: 3/8-24 to 1/4-inch NPT.

      • Which options are encoded by the complete 190501-09-00-04 order string?

        In 190501-AA-BB-CC, 09 selects the 3/8-24 to 1/4-inch NPT plate stud, 00 selects the MIL-C-5015 interface, and 04 selects the listed multiple approvals.

      • What machine speed range is this Velomitor intended for?

        Bently Nevada describes the CT transducer for cooling towers and air-cooled heat exchangers operating at 90 rpm or faster; monitor filters and alarm settings still require application engineering.

      • Which companion hardware or system interfaces must be checked for 190501-09-00-04?

        Electrical interface: MIL-C-5015.

      • Which installation checks are required for 190501-09-00-04?

        Isolate energy, record the installed position and wiring, verify the complete nameplate and connector arrangement, then follow the applicable manufacturer and site procedures.

      • Which commissioning tests should be completed after fitting 190501-09-00-04?

        Match the mounting adapter, connector, monitor sensitivity and hazardous-area approval. Prepare a clean, rigid mounting surface and route the cable to avoid flexing or water ingress. The 100 mV/in/s sensitivity and 3-900 Hz frequency response must be reflected in the receiving monitor configuration. After installation, verify bias or health indications, signal polarity, noise, vibration response and alarm behavior.

      • Which nameplate and revision details must match when replacing 190501-09-00-04?

        No. Match the complete order code, hardware family, dimensions, interfaces and documented options. Appearance or a shared family name is not sufficient evidence of interchangeability.

      • Which environmental or approval limits apply to 190501-09-00-04?

        Approval option: Multiple approvals: CSA/NRTL/C and ATEX/IECEx; Operating temperature: -40 to +85 °C.
      All FAQ
      MORE PARTS IN THE SAME PROJECT?

      Search another part number

      Use the exact manufacturer number where possible.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          SEE PRODUCTS IN SEARCH PAGE ()
          WHY BUYERS WORK WITH MOORE AUTOMATED

          Clear checks before you commit

          Product-specific verification and written commercial details help purchasing and maintenance teams reduce mismatch risk.

          • Pre-shipment inspection

            Products are inspected before dispatch to verify model, condition and applicable specifications.

          • Documentation available

            Product photos, packaging photos, certificates and datasheets can be provided when available.

          • Clear commercial terms

            Condition, warranty, lead time, included items and shipping terms are stated clearly in writing.

          • 20+ years of experience

            Over 20 years of experience in industrial automation and hard-to-source legacy parts.

          • Product Lifecycle Stage

            Bently Nevada publishes current technical documentation for the 190501 Velomitor CT family. That family documentation does not by itself confirm the manufacturing lifecycle or immediate availability of every configured order string, including 190501-09-00-04. Moore Automated confirms the offered unit's identity, condition, test scope and one-year independent-supplier warranty in the written quotation.

          Related Products

          Browsing history

          Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
          Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.

          Get a quick price for:

          190501-09-00-04
          Quantity
          Upload
          (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
          Get a Quote
          For more information on how your data is processed and stored by Moore Automated please read our privacy policy.
          img0
          img0