Overview
Manuals
Loop Setup
System Match
Validation Steps
Features:
- Case Expansion Transducer System for the documented Bently Nevada case expansion transducer system.
- Electrical Scale Factor: 0.404 V/mm (10.25 V/in).
- Linear Range: 50.8 mm (2.00 in).
24765-02-01 belongs to the Bently Nevada case expansion transducer system and performs the documented case expansion transducer system role in the Bently Nevada case expansion transducer system. The retained technical evidence records Electrical Scale Factor: 0.404 V/mm (10.25 V/in); Linear Range: 50.8 mm (2.00 in); -3 dB Frequency: 15 Hz. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Bently Nevada case expansion transducer system receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 24765-02-01 Case Expansion Transducer System is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
24765-02-01 Bently Nevada product documentation and selection resources.
Important Notice: The uploaded PDF documents the listed model or its identified Bently Nevada product family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Loop Setup: 24765-02-01 performs the case expansion transducer system function within the Bently Nevada case expansion transducer system. The retained documentation identifies electrical scale factor as 0.404 V/mm (10.25 V/in); apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
System Match: approve 24765-02-01 only for the documented Bently Nevada case expansion transducer system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Validation Steps: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 24765-02-01.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
