Overview
Manuals
Velocity Sensing
Monitor Compatibility
Mounting Checks
Features:
- The documented value for mounting thread adaptor is M8 x 1; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented value for agency approval is CSA/US/C; the complete approval suffix must match the installation area and site requirements.
- The documented value for temperature sensitivity is -14% to +7.5% typical; use this value when checking the monitor configuration, operating limits and expected measurement response.
330500-02-01 is a Bently Nevada Velomitor Piezo-velocity Sensor for the 3300 system. It supports the specified vibration or position function in a matched 3300 channel. Key specifications: Mounting Thread Adaptor: M8 x 1; Agency Approval: CSA/US/C. Match the full order code and hardware before replacement.
Confirm the complete 330500-02-01 order code, installed signal chain, mounting arrangement and commissioning record before replacement.
The 330500-02-01 Bently Nevada Velomitor Piezo-velocity Sensor may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330500-02-01 Velomitor Piezo-velocity Sensor manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 330500-02-01 only with the documented signal type and connection arrangement. Retained facts: Mounting Thread Adaptor: M8 x 1; Agency Approval: CSA/US/C; Temperature Sensitivity: -14% to +7.5% typical. Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
