Overview
Manuals
Mechanical Construction
Target Geometry
System Matching
Features:
- Provides the metric threaded configuration for the corresponding 3300 XL 11 mm installation.
- Combines a 60 mm case with a 1.0 m armored probe cable for demanding installation environments.
- Delivers the longer sensing range associated with the 3300 XL 11 mm system.
The Bently Nevada 330710-00-060-10-02-00 is a 3300 XL 11 mm Proximity Probe configured with an M16 × 1.5 thread, 0 mm unthreaded length, 60 mm overall case length, and 1.0 m total probe cable length. The configuration uses an armored cable, miniature coaxial ClickLoc connector with standard cable, and the 00 agency-approval option.
The probe operates as part of the 3300 XL 11 mm Proximity Transducer System, which consists of the probe, compatible extension cable, and 3300 XL 11 mm Proximitor Sensor. Bently Nevada specifies the system for non-contact vibration and displacement measurement and identifies applications including axial/thrust position, steam-turbine ramp differential expansion, reciprocating-compressor rod position or rod drop, tachometer/zero-speed, and Keyphasor measurements.
The 330710-00-060-10-02-00 Bently Nevada 3300 XL 11 mm proximity probe may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330710-00-060-10-02-00 3300 XL 11 mm proximity probe Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The probe tip is made from polyphenylene sulfide (PPS) and the probe case from AISI 304 stainless steel. The integral cable is a 75 Ω triaxial FEP-insulated cable, while the armored construction uses flexible AISI 302 stainless-steel armor with an FEP outer jacket.
The manufacturer recommends a minimum flat target diameter of 30.5 mm (1.2 in) and a recommended minimum shaft diameter of 152 mm (6.0 in) for the 3300 XL 11 mm system. When operating below the recommended shaft size, probe separation and gap should be carefully considered to limit cross-talk.
The probe must be used with a compatible 3300 XL 11 mm Proximitor Sensor and extension cable. Bently Nevada specifies that the complete system is designed around matched probe, cable, and Proximitor components; the extension-cable length plus probe length must equal the selected Proximitor Sensor system length.
