Overview
Manuals
Clamp Configuration
Mounting Bracket
Installation & Verification
Features:
- Exact configuration 330879-03-00: two clamps for CIDE applications, with no DE mounting bracket included.
- The clamp pair contains one right-exit and one left-exit clamp so the two probe cables leave from the same side of the CIDE bracket.
- The documented sliding-bracket material is anodized aluminum and stainless steel, rated from -35 to +200 degrees C.
The 330879 family provides the sliding mechanical support used to position 3300 XL 50 mm probes near a differential-expansion collar. For 330879-03-00, option 03 identifies the two-clamp complementary-input arrangement. The two clamps have opposite exits, allowing both probe cables to be routed toward the same side of the CIDE mounting bracket while preserving the required probe orientation.
Option 00 identifies a clamp-only supply and does not include a single, short CIDE or long CIDE mounting bracket. Select that mounting hardware separately from the installed turbine geometry. During commissioning, secure the probes in the clamps, establish the approved gaps, move the sliding carriage through the verification travel and confirm both differential-expansion channels before returning the machine to service.
The 330879-03-00 Bently Nevada 330879 Sliding Probe Bracket may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330879-03-00 documentation and reference links.
Important Notice: Confirm the complete catalog identity, revision, receiving-system configuration and required document revision before replacement.
Option 03 supplies two clamps for complementary input differential expansion (CIDE) applications. One clamp has a right exit and the other a left exit, allowing both probe cables to leave from the same side of the CIDE bracket.
Option 00 means no DE mounting bracket is included. The exact item is the clamp pair only; single, short CIDE and long CIDE sliding mounting brackets are separate catalog items selected from the installed geometry.
Install the two 50 mm probes in the clamps, confirm the required cable exits and secure the clamps to the selected sliding carriage. Gap both probes to the approved collar targets, then move the carriage through the verification travel with the specified spindle-micrometer kit and prove both channels.
