Overview
Manuals
Configuration Notes
Installation Guidance
Features:
- Designed as an interconnect cable for Bently Nevada vibration-monitoring sensor installations.
- Official 2300-series documentation specifies 9571 cables for use with accelerometers and Velomitor sensors.
- Provides the sensor-to-monitor connection required within the Bently Nevada 2300 vibration-monitoring architecture.
The Bently Nevada 9571-20 is a standard interconnect cable used in vibration monitoring systems to connect compatible vibration sensors with Bently Nevada monitoring equipment. In the official technical documentation for the 2300 Series vibration monitors, the 9571 cable is specified as a component for configurations utilizing the 200350 accelerometer and the 330500 Velomitor sensor.
Consequently, the cable serves as the signal interconnection medium between the vibration sensor and the associated monitoring system, transmitting measured vibration signals to the monitor to facilitate condition monitoring functions. Official 2300 Series documentation lists 9571 cables in 12-foot (3.6-meter) and 17-foot (5.2-meter) lengths—depending on the sensor configuration—underscoring their role as dedicated field interconnect components within Bently Nevada vibration monitoring systems.
The 9571-20 Bently Nevada Standard Interconnect Cables may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 9571-20 Standard Interconnect Cables Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 9571-20 should be selected according to the sensor type, required cable length, monitoring platform and installation arrangement. In the official 2300 documentation, 9571 cables are paired with specific Bently Nevada sensor packages rather than treated as universal cables; therefore, replacement selection should maintain compatibility with the original sensor and monitor configuration. The manufacturer also shows that different 2300 packages use different 9571 cable lengths, so cable length is an important part of system configuration.
For an existing Bently Nevada installation, the replacement cable should match the original 9571 series configuration and specified length, and the sensor/monitor combination should be checked against the applicable Bently Nevada documentation before commissioning. The official 2300 documentation provides the strongest confirmation of the cable's intended use: 9571 interconnect cables are used with Bently Nevada accelerometers and Velomitors as part of the 2300 vibration-monitoring system.
