Overview
Manuals
Standard Signal
Probe Length Review
Dual Global MOD 147202-01
Features:
- Exact 990-05-XX-03-05 MOD:147202-01 two-wire radial-vibration transmitter with a 4–20 mA loop output.
- Ordered full-scale execution: 0–5 mils peak-to-peak (0–125 µm peak-to-peak).
- 3300 NSv system-length and mounting executions: XX — not defined in the current official ordering table; verify the controlled order/MOD record; 35 mm DIN-rail clips and bulkhead screws.
The 990-05-XX-03-05 MOD:147202-01 accepts one 3300 NSv proximity-probe system and converts radial shaft vibration into a proportional 4–20 mA current-loop output. Its published signal path operates from +12 to +35 Vdc, supports up to 1000 Ω loop resistance at 35 Vdc, and provides a buffered Prox Out connection for local waveform or gap checks.
This order code records 0–5 mils peak-to-peak (0–125 µm peak-to-peak), XX — not defined in the current official ordering table; verify the controlled order/MOD record, 35 mm DIN-rail clips and bulkhead screws and CSA Division 2, ATEX Zone 0/2 and ABS approvals. Before replacement, verify the complete code, 3300 NSv probe/cable match, probe gap, loop supply and resistance, polarity, monitor scaling, alarms and NOT OK behavior. The additional marking MOD:147202-01 is retained exactly and must be verified from the controlled order/MOD record because the public ordering table does not decode it.
The 990-05-XX-03-05 MOD:147202-01 Bently Nevada 990 Two-Wire Vibration Transmitter may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 990-05-XX-03-05 MOD:147202-01 documentation and reference links.
Important Notice: Official Baker Hughes/Bently Nevada datasheet 141612 is the technical source for the 990 transmitter family. Confirm the complete nameplate, option codes, connected equipment and required controlled documents before replacement.
990-05-XX-03-05 MOD:147202-01 uses the documented 0–5 mils peak-to-peak (0–125 µm peak-to-peak) execution to convert radial vibration into its 4–20 mA loop signal. Commission the receiving channel against this exact range, preserve polarity and engineering units, and retain the established vibration alarms and trip logic.
990-05-XX-03-05 MOD:147202-01 records XX — not defined in the current official ordering table; verify the controlled order/MOD record for the matched 3300 NSv probe and extension-cable chain. Confirm the combined electrical length, connector condition, probe gap and buffered Prox Out response before accepting the loop reading.
990-05-XX-03-05 MOD:147202-01 records 35 mm DIN-rail clips and bulkhead screws with CSA Division 2, ATEX Zone 0/2 and ABS approvals. Match the physical mounting hardware, terminal access, grounding and approval marking, then prove the NOT OK response through the receiving system without changing protection setpoints. Retain the additional marking MOD:147202-01 exactly and verify it against the controlled order or MOD record; the public ordering table does not decode it.
