Overview
Manuals
Network Fit
Interface Match
Acceptance Test
Features:
- PROFIBUS Slave Module for the documented GE Fanuc Series 90-30.
- Hardware Role: PROFIBUS Slave Module.
- Receiving System: Approved GE Fanuc Series 90-30 rack position.
IC693PBS105 belongs to the GE Fanuc Series 90-30 and performs the documented profibus slave module role in the GE Fanuc Series 90-30 PLC architecture. The retained technical evidence records Hardware Role: PROFIBUS Slave Module; Receiving System: Approved GE Fanuc Series 90-30 rack position; Backplane Basis: Matching Series 90-30 rack and slot interface. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the GE Fanuc Series 90-30 receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The IC693PBS105 PROFIBUS Slave Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
GE IC693PBS105 PROFIBUS Slave Module Manual(Datasheets), Link
Important Notice: No verified exact-model PDF was available when this page was reviewed. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Network Fit: IC693PBS105 performs the profibus slave module function within the GE Fanuc Series 90-30. The retained documentation identifies hardware role as PROFIBUS Slave Module; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Interface Match: approve IC693PBS105 only for the documented GE Fanuc Series 90-30 PLC architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Acceptance Test: isolate the equipment, remove stored energy and inspect the receiving hardware before installing IC693PBS105.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
