Overview
Manuals
Functionality
Hardware & System Interface
Compatibility & Replacement
Features:
- System Platform: GE Speedtronic Mark V and Mark VI turbine-control architecture
- Functional Role: TURBINE CONTROL LCI CARD function in the documented GE Mark V and Mark VI Speedtronic architecture
- Interface Basis: Matching connectors, terminal boards and rack hardware
The DS200DSPCH1A General Electric turbine control lci card performs the documented control, interface or signal-processing duty assigned to its board position within the GE Mark V and Mark VI Turbine Controls platform. Its value in an operating plant comes from preserving the intended relationship between the installed hardware, connected field equipment and the approved control-system configuration. Using the complete model identity helps maintenance teams avoid connector, channel-allocation and hardware-execution mismatches during replacement.
Before installing DS200DSPCH1A, compare the full product label, installed position, terminal or connector arrangement, paired assemblies and available project records. Retain required firmware, logic, settings and channel assignments, then review diagnostics and function-test every affected path before returning the equipment to service. The supplied condition, exact revision and included accessories should be confirmed in the written quotation.
The DS200DSPCH1A General Electric TURBINE CONTROL LCI CARD is identified as Obsolete/Discontinued by OEM. Moore Automated may still be able to supply the required hardware and support documentation, subject to stock and exact-model verification.
General Electric DS200DSPCH1A documentation and reference links.
Important Notice: The linked information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
DS200DSPCH1A is applied as a turbine control lci card in the GE Mark V and Mark VI Turbine Controls platform and performs the documented control, interface or signal-processing duty assigned to its board position. The retained product record identifies System Platform: GE Speedtronic Mark V and Mark VI turbine-control architecture; Functional Role: TURBINE CONTROL LCI CARD function in the documented GE Mark V and Mark VI Speedtronic architecture; Interface Basis: Matching connectors, terminal boards and rack hardware.
Actual operating behavior depends on the receiving hardware, connected equipment, firmware or configuration and the approved project design. Confirm the exact execution before transferring wiring, settings or logic.
For DS200DSPCH1A, review the installed turbine control lci card position in the GE Mark V and Mark VI Turbine Controls system, including connector keying, terminal allocation, field wiring, grounding, power sources and any carrier or backplane interface.
Record the original installation before removal. After replacement, inspect diagnostics and verify every affected signal, command, protection action or communication path under controlled operating conditions.
Lifecycle stage: Obsolete/Discontinued by OEM
Do not assume that another revision directly replaces DS200DSPCH1A. Match the complete model code, turbine control lci card hardware execution and GE Mark V and Mark VI Turbine Controls receiving-system requirements. State the required condition, quantity, installed position and documentation scope in the enquiry.
Moore Automated confirms the supplied item identity, condition, included accessories and available documentation in the written quotation before dispatch.
