Registered Address: 32D Floor Guomao Building, No.388, Hubin South Road, Siming District, Xiamen,Fujian, China
0552N1QLG132A-01 is a GE control module used within the GE Speedtronic turbine-control architecture. It provides the specified control module function while retaining the complete order code, hardware execution and receiving-system compatibility during replacement. Its documented category series is PLCs.
Verify that the supplied item is marked 0552N1QLG132A-01 and that its control module form, connectors and revision agree with the approved GE Mark VIe receiving record.
For 0552N1QLG132A-01, state the required condition, quantity, installed position, connected assemblies and document requirements in the written enquiry.
Apply only parameters supported by the exact 0552N1QLG132A-01 record or a documented family source. Do not infer electrical ratings or interchangeability from appearance.
0552N1QLG132A-01 technical scope: Product Type: Control module; Category Series: PLCs; Power Supply: DC 24V; Current: 3.4A; Input/Output Channels: 16 channels.
Use these values only for the listed hardware execution and verify the supplied label before installation.
Match 0552N1QLG132A-01 to the approved GE Mark VIe receiving position, connector or terminal arrangement and configuration record.
After power restoration, review diagnostics and test the affected control module path.
Active / Available from OEM
0552N1QLG132A-01 is a General Electric control module associated with the GE Mark VIe platform. It supports the documented automation function assigned to its installed module, rack or cabinet position. Correct selection depends on the complete model code, connector or terminal arrangement, hardware revision and receiving-system configuration. Before replacement, compare the original product label, installed slot or cabinet reference, connected assemblies and approved project records. After installation, review system diagnostics and function-test every affected channel, control path, protection function or communication link before returning the equipment to service.