Overview
Manuals
Identity Evidence
Order Controls
Technical Boundary
Features:
- Baud rates: The documented rx3i serial communications module. four isolated rs-232/485 port. supports serial read/write and modbus master/slave. requires unversal backplane. specification is 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2k; verify it against the supplied nameplate before installation.
- Data bits: The documented rx3i serial communications module. four isolated rs-232/485 port. supports serial read/write and modbus master/slave. requires unversal backplane. specification is 7, 8; verify it against the supplied nameplate before installation.
- Stop bits: The documented rx3i serial communications module. four isolated rs-232/485 port. supports serial read/write and modbus master/slave. requires unversal backplane. specification is 1, 2; verify it against the supplied nameplate before installation.
The IC695CMM004 General Electric rx3i serial communications module. four isolated rs-232/485 port. supports serial read/write and modbus master/slave. requires unversal backplane. plays a defined role in industrial automation and maintains the documented industrial communication path between controllers and connected devices within the PACSystems RX3i platform. Its documented execution helps the control system maintain dependable operation while reducing the risk of mismatched connectors, channel assignments, ratings and hardware revisions during maintenance.
Before installing IC695CMM004, compare the complete product label, terminal or connector arrangement, paired assemblies, firmware or logic requirements and approved project records. After replacement, review diagnostics and function-test every affected control, protection, communication or field-signal path before returning the equipment to service.
The IC695CMM004 General Electric RX3i serial communications module. Four isolated RS-232/485 port. Supports Serial Read/Write and Modbus Master/Slave. Requires Unversal Backplane. is identified as Active / Available from OEM. Current availability, revision and supplied scope are confirmed in the written quotation.
General Electric IC695CMM004 documentation and reference links.
Important Notice: The linked information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
Verify that the supplied item is marked IC695CMM004 and that its rx3i serial communications module. four isolated rs-232/485 port. supports serial read/write and modbus master/slave. requires unversal backplane. form, connectors and revision agree with the approved PACSystems RX3i receiving record.
For IC695CMM004, state the required condition, quantity, installed position, connected assemblies and document requirements in the written enquiry.
Apply only parameters supported by the exact IC695CMM004 record or a documented family source. Do not infer electrical ratings or interchangeability from appearance.
