Registered Address: 32D Floor Guomao Building, No.388, Hubin South Road, Siming District, Xiamen,Fujian, China
The General Electric IC698CPE020-GP is a cpu module for PACSystems RX7i industrial automation applications. Documented product details include RX7i VME 700Mhz CPU; CPU from the PACSystems RX7i series; has three serial ports and; two Ethernet ports. Confirm the complete model code, hardware revision and supplied condition against the installed equipment before replacement.
Verify that the supplied item is marked IC698CPE020-GP and that its cpu module form, connectors and revision agree with the approved PACSystems RX7i receiving record.
For IC698CPE020-GP, state the required condition, quantity, installed position, connected assemblies and document requirements in the written enquiry.
Apply only parameters supported by the exact IC698CPE020-GP record or a documented family source. Do not infer electrical ratings or interchangeability from appearance.
IC698CPE020-GP technical scope: Processing Speed: 700 MHz; CPU Memory: 10 Mbytes; Floating Point: Yes; Serial Ports: 3; Serial Protocols: Modbus RTU Slave, SNP, Serial I/O.
Use these values only for the listed hardware execution and verify the supplied label before installation.
Match IC698CPE020-GP to the approved PACSystems RX7i receiving position, connector or terminal arrangement and configuration record.
After power restoration, review diagnostics and test the affected cpu module path.
Obsolete/Discontinued by OEM
IC698CPE020-GP is a General Electric cpu module associated with the PACSystems RX7i platform. It supports the documented controller execution, communications and configuration functions assigned to the installed processor position. Correct selection depends on the complete model code, connector or terminal arrangement, hardware revision and receiving-system configuration. Before replacement, compare the original product label, installed slot or cabinet reference, connected assemblies and approved project records. After installation, review system diagnostics and function-test every affected channel, control path, protection function or communication link before returning the equipment to service.