Overview
Manuals
Phase Gate
Heat Path
Surge Limit
Features:
- Controlled Rectification: A thyristor and diode share an insulated module for phase-controlled power-conversion circuits.
- Defined Thermal Rating: The 330 A average rating is tied to an 85°C case and the manufacturer-specified sinusoidal waveform.
- Pressure-contact Construction: Robust internal contacts and an electrically insulated baseplate serve industrial power assemblies.
The Infineon TD330N16KOF combines a controlled thyristor and a diode in a Power Block module for phase-control circuits. Its 1600 V blocking capability and 330 A average-current rating are specified for defined electrical and thermal conditions, including an 85°C case temperature for the current rating. Pressure-contact construction and an electrically insulated baseplate support installation in industrial power assemblies, while the published junction-to-case thermal resistance helps designers establish a suitable cooling arrangement. This device is used in matched power-conversion designs; the semiconductor module does not replace the complete drive or its control electronics.
Application performance depends on the complete circuit, thermal path and gate-drive design. Engineers should check the conduction waveform, case temperature and protective-device coordination instead of applying the 330 A designation as an unconditional operating limit. The non-TIM ordering identity must also remain distinct from versions supplied with pre-applied thermal interface material, so replacement planning should include the exact order code and the existing heatsink arrangement.
Technical source: Infineon official TD330N16KOF product record; ratings include their published waveform and temperature conditions.. Match the complete ordering code and supplied execution.
TD330N16KOF documentation and product-selection resources. An exact-model English PDF is not currently attached.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The thyristor and diode form a phase-control power module. Match the circuit symbol and terminal connections to the equipment drawing; a dual-thyristor module is not the same configuration.
The 330 A average rating is stated at a case temperature of 85°C for a 180-degree sine waveform. Account for case-to-heatsink resistance and cooling losses in addition to the published 0.112 K/W junction-to-case value.
The published 10,000 A surge value is a 10 ms maximum-junction-temperature rating. It is not a continuous current rating; evaluate the actual fault duration and protective-device coordination.
