Overview
Manuals
Network Role
Integration Fit
Final Checks
Features:
- Optical ESB Bus Repeater Slave Module for the documented Yokogawa CENTUM VP.
- Primary Function: Optical ESB Bus Repeater Slave Module.
- Hardware Form: rack-mounted control, I/O or bus module.
ANT502-10 belongs to the Yokogawa CENTUM VP and performs the documented optical esb bus repeater slave module role in the Yokogawa CENTUM VP process-control system. The retained technical evidence records Primary Function: Optical ESB Bus Repeater Slave Module; Hardware Form: rack-mounted control, I/O or bus module; Installation Match: ANT502-10 receiving hardware. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Yokogawa CENTUM VP receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The ANT502-10 Optical ESB Bus Repeater Slave Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
ANT502-10 Yokogawa product documentation and selection resources.
Important Notice: The PDF documents ANT502-10 or its verified Yokogawa product family. Confirm the complete suffix code and installed-system requirements before replacement.
Network Role: ANT502-10 performs the optical esb bus repeater slave module function within the Yokogawa CENTUM VP. The retained documentation identifies primary function as Optical ESB Bus Repeater Slave Module; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Integration Fit: approve ANT502-10 only for the documented Yokogawa CENTUM VP process-control system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Final Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing ANT502-10.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
