Overview
Manuals
Principle
Features:
- AO810/AO810V2 Analog Output Module
- Analog Output is to be short circuit secured to ZP or +24 V
- OSP sets outputs to predetermined state upon error detection
The analog output module has 8 unipolar analog output channels. To monitor communication with the digital-to-analog converter, the module reads and verifies serial data. Open-circuit diagnostic information is received during the reading process. The module performs self-diagnostics periodically.
Module diagnostics include process power supply monitoring; when the supply voltage to the output circuit is too low, the module issues a fault report. This error report indicates a channel error. Channel diagnostics also include channel fault detection (reporting only on active channels). This error is reported if the output current is less than the output setpoint, and the output setpoint is greater than 1 mA.
The AO810V2 3BSE038415R1 ABB Analog Output Module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
ABB AO810V2 3BSE038415R1 Analog Output Module Manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
This module integrates signal conditioning circuitry, isolation barriers, and output monitoring mechanisms to ensure signal linearity, electrical protection, and fault detection. The AO810V2 3BSE038415R1 provides accurate, stable, and deterministic analog signals for continuous process control applications through controllable digital-to-analog conversion and regulated current output circuitry.
