Overview
Manuals
DCS800 Power Interface Funct
DCS Fit
Commissioning
Features:
- The documented abb article number is 3ADT314100R1001.
- The documented base board in abb documentation is SDCS-PIN-4.
- The documented product type is Interface board and field supply.
SDCS-PIN-4-COAT 3ADT314100R1001 is an ABB DCS800 Power Interface and Field-Supply Board selected by its complete product identity and documented equipment role. Suitability depends on the installed DCS 800 hardware, interfaces and application requirements matching the supplied unit.
Before replacement, record the nameplate, installed position, terminal or connector arrangement and paired assemblies. After installation, verify every affected power, communication, protection, control or I/O function before returning SDCS-PIN-4-COAT 3ADT314100R1001 to service.
The SDCS-PIN-4-COAT 3ADT314100R1001 ABB DCS800 Power Interface and Field-Supply Board is listed as Obsolete / Discontinued by OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
ABB SDCS-PIN-4-COAT 3ADT314100R1001 documentation and reference links.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
SDCS-PIN-4-COAT 3ADT314100R1001 performs the documented dcs800 power interface and field-supply board function within the DCS 800 system. Confirm the recorded power, signal, communication and mechanical interfaces against the approved equipment record. Do not infer ratings or interchangeability from appearance; the complete label and hardware revision control selection.
Replacement of SDCS-PIN-4-COAT 3ADT314100R1001 requires an exact match to the receiving DCS 800 hardware, connected assemblies and configuration record. Record the installed position and connections before removal, preserve required settings, and verify every affected function after installation.
Before energizing SDCS-PIN-4-COAT 3ADT314100R1001, inspect mounting, connector keying, terminal allocation, protective grounding and paired equipment. After startup, review diagnostics and complete controlled functional tests before returning the equipment to service.
