Overview
Manuals
Identity Match
Rack Compatibility
Service Guidance
Features:
- PAB02 is identified as a binary output module in the ABB/Hartmann & Braun H&B Contronic P product family.
- The supplied-item identity includes P70870-4-0369059 and 369059A10; both markings should be checked together.
- Controlled replacement requires the same rack position, connector keying and documented field-output wiring.
PAB02 identifies a binary output module used in an H&B Contronic P control installation. Similar boards should not be considered interchangeable from appearance alone, because the receiving rack, connector arrangement and project wiring can differ. Compare the complete PAB02, P70870-4-0369059 and 369059A10 identification with the installed module and original system records before service.
Official source: ABB/Hartmann & Braun product identification and the supplied-item PAB02, P70870-4-0369059 and 369059A10 markings. Confirm the receiving installation before replacement.
PAB02 identification Manuals / Datasheets / Links
Important Notice: Other accessories, manuals, cables, calibration data, software, licenses and related items are not included unless listed in the stock item description. All prices are shown in USD.
Verify the full PAB02, P70870-4-0369059 and 369059A10 marking set. A clear nameplate photograph should be compared with the quotation before the module is dispatched.
Confirm the installed H&B Contronic P rack position, mating connector, mechanical keying and original output assignment. Do not substitute a visually similar module until the complete installation identity agrees.
Before removal, isolate power in accordance with the site procedure and label every connector and output conductor. Reinstall only after the replacement identity and original wiring records have been verified.
