Overview
Manuals
Robot Variant Match
Axis Cable Routing
Reduced Speed Test
Features:
- ABB article 3HAC033388-001 identifies a robot cable harness associated with axes 1–6. Selection is controlled by the complete robot type, serial number, manipulator revision and installed dress/cabling execution.
- Confirm article number, IRB 6600 variant, robot serial number, axis routing, controller connection, connector keying, cable length and any dress-pack options.
- Use it only in the robot configuration whose ABB spare-parts list names 3HAC033388-001.
3HAC033388-001 is selected from the complete manufacturer identity and receiving-system evidence. Power down and lock out the robot, record routing/clamps and connector positions, support the arm and follow the ABB manipulator service procedure. Check insulation and continuity, then jog each axis at reduced speed while observing clearance, strain relief, bend radius and controller diagnostics.
Official source: ABB IRB 6600 product and service documentation with the complete 3HAC033388-001 article marking. The official manual supports the robot family and service context; exact harness compatibility remains serial-number controlled.
3HAC033388-001 official technical documentation and verified Moore Automated resources.
Important Notice: Confirm the complete model, article number and installed configuration before replacement. All links open in a new page.
Verify the full IRB 6600 type, serial number and parts list before selecting the harness.
Reproduce every clamp, service loop, protective sleeve and bend radius through axes 1–6.
Jog the robot through the approved envelope while checking clearance, tension and cable diagnostics.
