Request a Parts Quote
Name
Company *
Phone *
Email *
Address
City
State / Province / Region
Zipcode
Country
Quantity *
Part Number *
Manufacturer
Preferred Condition
Additional Information
Cancel
  • ISO 9001:2015 Certified

    Our quality management system covers sourcing,testing and dispatch
  • View Our Success Stories

    Real stories from real customer orders
In Stock
Ships by Tuesday, September 15
Fast Shipping Available
DeviceNet slave fieldbus adapter

DSQC1004

Spare Part Number

PN3HAC045973-001

Product Information:

DSQC1004 3HAC045973-001 is an AnybusCC DeviceNet slave fieldbus adapter for ABB robot controllers. It installs in the controller fieldbus-adapter slot and provides DeviceNet slave communication. For IRC5 installations, ABB documents the DSQC1000 main-computer requirement and model-specific setup procedures.


  • One-year warranty
  • Global shipping
  • Exact-model verification
    • PRODUCT OVERVIEW

      What is this product?

      ABB identifies DSQC1004 under article number 3HAC045973-001 as a DeviceNet slave fieldbus adapter. The documented hardware belongs to the AnybusCC fieldbus adapter configuration and must be selected by the complete DSQC designation together with the ABB article number. Its interfaces, software or axis assignment depend on the installed controller and option set. Buyers should therefore compare the nameplate, controller generation and applicable ABB manual before replacement rather than relying on enclosure appearance or the short DSQC code alone.

      Source boundary

      Product identity and technical values are limited to ABB application manual 3HAC050993-001 and controller manual 3HAC047136-001; final compatibility is confirmed against the installed unit and controller records.
    • APPLICATIONS

      Where it may be used

      These service contexts apply only after DSQC1004, 3HAC045973-001 and the installed AnybusCC fieldbus adapter configuration have been confirmed.

      DeviceNet slave commissioning

      Configure a confirmed controller as a DeviceNet slave.

      Anybus slot service

      Restore the documented fieldbus-adapter position.

      Controller network retrofit

      Add the ABB-listed DeviceNet slave option.

      I/O link verification

      Check scanner settings and controller configuration.
Technical specifications for

DSQC1004

0 TECHNICAL PARAMETERS
  • Manufacturer:
    ABB
  • Product Category:
    Robotics
  • Spare Part Number:
    3HAC045973-001
  • Product type:
    AnybusCC DeviceNet slave fieldbus adapter
  • Type designation:
    DSQC1004
  • Fieldbus:
    DeviceNet
  • Network role:
    Slave adapter
  • Controller option:
    DeviceNet Slave Fieldbus adaptor [3030-1]
  • Installation position:
    Fieldbus-adapter slot on the controller expansion board
  • IRC5 computer requirement:
    DSQC1000
  • Status indication:
    Network status (NS) and module status (MS) LEDs
  • Stock:
    33
WHAT HAPPENS NEXT?

From enquiry to delivery

Six clear steps show what information is required and what the written quotation will contain.
  • 01

    Find the product

    Search the part number or send an inquiry for obsolete, discontinued or hard-to-find parts.
  • 02

    Provide the details

    Share the exact part number, quantity, condition, revision, destination and any required certificates or photos.
  • 03

    Review the quotation

    Receive price, currency, condition, availability, warranty, lead time, shipping terms and quotation validity in writing.
  • 04

    Confirm the order

    Accept the quotation in writing and complete the required payment before shipment.
  • 05

    Pay by bank transfer

    Pay the full invoiced amount by bank wire in RMB/CNY, GBP, EUR or USD using the official invoice details.
  • 06

    Verify and dispatch

    The part is inspected, tested and securely packed before dispatch, with tracking provided after release.
BUYER INFORMATION

Product condition level information

Commercial details are confirmed in writing before payment.
  • 01

    Factory Sealed

    Unused product with the original factory seal intact; packaging age or storage marks may still be present.

  • 02

    Original Pack

    Unused product in original manufacturer packaging that was not originally factory sealed.

  • 03

    Factory New

    New and current product sourced through the manufacturer or authorized supply channel when expressly confirmed in the quotation.

Alternative Names

DSQC1004 3HAC045973-001 DSQC 1004 3HAC045973-001 DSQC1004 3HAC045973001 DSQC 1004 DSQC 1004 3HAC045973001

Information

Overview Manuals DSQC1004 Hardware Identity Compatibility Service Preparation Notes

Features:

  • DeviceNet slave adapter
  • AnybusCC controller option
  • NS/MS status indication
ABB identifies DSQC1004 under article number 3HAC045973-001 as a DeviceNet slave fieldbus adapter. The documented hardware belongs to the AnybusCC fieldbus adapter configuration and must be selected by the complete DSQC designation together with the ABB article number. Its interfaces, software or axis assignment depend on the installed controller and option set. Buyers should therefore compare the nameplate, controller generation and applicable ABB manual before replacement rather than relying on enclosure appearance or the short DSQC code alone.

Product identity and technical values are limited to ABB application manual 3HAC050993-001 and controller manual 3HAC047136-001; final compatibility is confirmed against the installed unit and controller records.

The ABB DSQC1004 3HAC045973-001 DeviceNet slave fieldbus adapter is supported by Moore Automated for verified industrial replacement and spare-part requirements.
ABB DSQC1004 3HAC045973-001 DeviceNet slave fieldbus adapter manual(Datasheets), Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Order verification starts with both DSQC1004 and 3HAC045973-001. The controller family, installed position, connectors and visible revision information should be compared with the actual unit before replacement.
The module must be checked against the documented AnybusCC fieldbus adapter hardware and software arrangement. Similar DSQC enclosures or neighboring article numbers are not sufficient evidence of interchangeability.
Before replacement, preserve controller records, document wiring or mechanical connections and follow the applicable ABB isolation, ESD and recommissioning procedures. Required accessories are confirmed separately for the actual service scope.

Technical notes

DSQC1004 3HAC045973-001 is documented by ABB as a DeviceNet slave fieldbus adapter in the AnybusCC fieldbus adapter configuration. The complete 3HAC045973-001 article number, DSQC1004 type designation, controller generation and hardware position must be verified together because neighboring DSQC units can differ in interfaces, software support, power-stage arrangement or mechanical fit. Follow the applicable ABB service procedure, electrical isolation requirements and recommissioning checks for the installed system.

DeviceNet Adapter Identity Check

Confirm the full DSQC1004 3HAC045973-001 identity, DSQC marking, ABB article number, controller or robot type, hardware position and any visible revision data. If the label is unclear, provide close nameplate and connector photos before quotation.

DSQC1004 Quote Confirmation

For an accurate DSQC1004 quotation, provide quantity, complete 3HAC045973-001 article number, nameplate photos, installed controller or robot, relevant software or axis configuration, delivery country and required date. Moore Automated will use these details to verify the requested item.

Customs & shipping dimensions / weight

  • Packed shipping dimensions
    Confirmed after final packing
    Approx. 6.3 × 2.2 × 5 cm
  • Packed shipping weight
    Confirmed after final packing
    Approx. 0.03 kg
  • HS / customs code
    Indicative HS code 85176200
    Final destination-specific classification requires customs confirmation
  • Country of origin
    Sweden
    Confirmed from ABB product documentation
  • Ships from
    Xiamen, Fujian, China
    Dispatch location confirmed in the written quotation
  • Customs documents
    Confirmed for the destination
    Available document scope stated in the written quotation
PRODUCT & ORDER FAQS

Questions buyers ask about DSQC1004

  • How can the exact DSQC1004 3HAC045973-001 item be confirmed?

    Confirm DSQC1004 3HAC045973-001, the separate DSQC1004 marking, 3HAC045973-001 article number and clear nameplate photos. Do not order from the DSQC family name alone.
  • Which controller details determine DSQC1004 3HAC045973-001 compatibility?

    Compatibility depends on the exact controller or robot generation, installed hardware position, software level and interfaces documented for this DeviceNet slave fieldbus adapter.
  • Where is DSQC1004 3HAC045973-001 used in the documented hardware?

    DSQC1004 3HAC045973-001 is documented as a DeviceNet slave fieldbus adapter within the AnybusCC fieldbus adapter configuration described by ABB.
  • What should be recorded before installing DSQC1004 3HAC045973-001?

    Record the existing unit label, controller identification, connectors, software or axis configuration and all option-specific service data before replacement.
  • Can current availability for DSQC1004 3HAC045973-001 be checked?

    Yes. Provide the quantity and complete DSQC1004 3HAC045973-001 identity so Moore Automated can confirm current availability in the written quotation.
  • How are warranty terms for DSQC1004 3HAC045973-001 stated?

    The written quotation states unit condition, inspection scope, warranty period and claim requirements for the offered DSQC1004 3HAC045973-001.
  • Which delivery details are required for DSQC1004 3HAC045973-001?

    Provide quantity, delivery country, postal code and required date so protective packing and dispatch timing can be confirmed.
  • What official ABB source supports DSQC1004 3HAC045973-001?

    ABB application manual 3HAC050993-001 and controller manual 3HAC047136-001 is used for product identity, configuration and order-stage technical verification.
MORE PARTS IN THE SAME PROJECT?

Search another part number

Use the exact manufacturer number where possible.
WHY BUYERS WORK WITH MOORE AUTOMATED

Clear checks before you commit

Product-specific verification and written commercial details help purchasing and maintenance teams reduce mismatch risk.
  • Pre-shipment inspection

    Products are inspected before dispatch to verify model, condition and applicable specifications.
  • Documentation available

    Product photos, packaging photos, certificates and datasheets can be provided when available.
  • Clear commercial terms

    Condition, warranty, lead time, included items and shipping terms are stated clearly in writing.
  • 20+ years of experience

    Over 20 years of experience in industrial automation and hard-to-source legacy parts.
  • Product Lifecycle Stage

    Active / Available from OEM

    DSQC1004 3HAC045973-001 remains identified in current ABB product or service documentation. Moore Automated supplies verified ABB replacement modules and spare parts to support reliable maintenance and reduce customer downtime.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.

Get a quick price for:

DSQC1004
Quantity
Upload
(gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Moore Automated please read our privacy policy.