Registered Address: 32D Floor Guomao Building, No.388, Hubin South Road, Siming District, Xiamen,Fujian, China

UN 0910a-P Var.1 is an ABB Voltage Monitor Module for the documented ABB UNITROL system. The documented product type is Voltage Monitor. The documented operating temperature is 0°C to 60°C. Selection requires the complete nameplate identity, hardware revision and receiving-system configuration. Verify affected functions after installation.
UN 0910a-P Var.1 is an ABB Voltage Monitor Module selected by its complete product identity and documented equipment role. Suitability depends on the installed ABB UNITROL hardware, interfaces and application requirements matching the supplied unit.
Before replacement, record the nameplate, installed position, terminal or connector arrangement and paired assemblies. After installation, verify every affected power, communication, protection, control or I/O function before returning UN 0910a-P Var.1 to service.
ABB UN 0910a-P Var.1 documentation and reference links.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
UN 0910a-P Var.1 performs the documented voltage monitor module function within the ABB UNITROL system. Confirm the recorded power, signal, communication and mechanical interfaces against the approved equipment record. Do not infer ratings or interchangeability from appearance; the complete label and hardware revision control selection.
Replacement of UN 0910a-P Var.1 requires an exact match to the receiving ABB UNITROL hardware, connected assemblies and configuration record. Record the installed position and connections before removal, preserve required settings, and verify every affected function after installation.
Before energizing UN 0910a-P Var.1, inspect mounting, connector keying, terminal allocation, protective grounding and paired equipment. After startup, review diagnostics and complete controlled functional tests before returning the equipment to service.
UN 0910a-P Var.1 is documented as an ABB Voltage Monitor Module for the ABB UNITROL equipment family. The documented product type is Voltage Monitor. The documented operating temperature is 0°C to 60°C. Use these values only with the complete product identity and verified receiving-system record.
Match UN 0910a-P Var.1 to the approved mounting position, terminal or connector arrangement, paired assemblies and configuration record. The documented protection rating is IP 20. After installation, verify every affected function.
Obsolete / Discontinued by OEM
Moore Automated supplies ABB UN 0910a-P Var.1 Voltage Monitor Module units subject to confirmed availability and condition. Every supplied item is inspected before shipment to support stable operation and reduce unplanned downtime.