Overview
Manuals
Configured I/O
Control Configuration
Panel Installation
Features:
- ControlMaster CM30 universal PID process controller in a 1/4 DIN panel-mount format.
- 000 I/O and function code for two analog inputs, one analog/digital output, one relay and base control.
- S0E0/STD configuration for CE approval, 100-240 V AC supply, English language and standard setup.
CM30/000S0E0/STD is an exact configured controller, not only a family name. Verify the full code, process input, output duty, supply voltage and panel arrangement before replacement.
Official source: ABB ControlMaster CM30 data sheet DS/CM30-EN defines the 1/4 DIN controller functions and decodes every position in 000S0E0/STD.
CM30/000S0E0/STD technical documentation and verified Moore Automated resources.
Important Notice: Confirm the complete model, revision and installed system before replacement.
The first ordering-code position is 0, defining the CM30 basic I/O build: two analog inputs, one analog/digital output and one relay. Optional extra I/O boards are not included in this configuration.
Match the universal process-input setup, analog or digital use of the primary output and relay contact duty to the original panel drawings before moving terminal wiring.
The second code position 0 specifies the base functionality level, which includes single-loop control, analog PID, on/off or time-proportioning control, autotune and split-output capability. Extended and dual-loop functions must not be assumed.
The /STD suffix specifies standard factory configuration. Confirm the setpoint, process range, control action, alarm limits and output scaling from the installed application before commissioning.
Install the 1/4 DIN controller in the documented 92 x 92 mm panel cutout with sufficient rear clearance. Verify the 100-240 V AC supply, protective-earth practice, terminal numbering and IP66/NEMA 4X front sealing.
After wiring, configure the correct input type and range, test the output and relay safely, then use autotune only when the process and operating procedure permit it. This build has no Ethernet or RS 485 communication option.
