Overview
Manuals
DSQC625 Identity
IRC5 Configuration
Power-Up Check
Features:
- The documented abb product id is 3HAC020464-001, and this value must match the supplied unit.
- The documented type designation is 24x20.5x9, and this value must match the supplied unit.
- The documented product type is Computer power supply, and this value must match the supplied unit.
ABB DSQC625 3HAC020464-001 is a Computer power supply documented for the applicable ABB Robots system configuration. Its recorded specification includes abb product id 3HAC020464-001, type designation 24x20.5x9, product type Computer power supply. Correct selection depends on the complete article identity, installed equipment, mechanical or electrical interfaces and the documented configuration rather than appearance alone. Using the exact model helps maintenance teams avoid incompatible revisions, connector arrangements and application variants.
Before installing DSQC625 3HAC020464-001, record the original nameplate, installed position, connected assemblies and every relevant configuration detail. Compare the supplied unit with the existing hardware and applicable ABB service documentation, isolate all affected energy sources and preserve required settings or calibration data. After installation, inspect each affected interface and complete controlled functional checks before returning the equipment to service.
The DSQC625 3HAC020464-001 ABB Computer power supply is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
ABB DSQC625 3HAC020464-001 documentation and reference links.
Important Notice: Every linked document must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
ABB identifies DSQC625 by article 3HAC020464-001 as an IRC5 computer power supply.
Confirm IRC5 M2004, IRC5 Single use, connector layout and assembly identifier 3HAC020536-014.
After replacement, monitor supply LEDs, controller boot, diagnostics and robot enable before handover.
