Overview
Manuals
Principle
Application
Features:
- Analog Combination Module in the Distributed I/O series
- 8 Analog Inputs and 2 x RJ-45, 10/100BaseT (with 100 Mbps) with integrated switch Guard PLC Ethernet Interfaces
- Operates with a 24V DC Operating Voltage and a 20 ms Response Time
The 1753-IF8XOF4 is a GuardPLC analog I/O module jointly developed by Allen-Bradley and Rockwell Automation. This industrial-grade module is designed to balance efficiency and safety. Allen-Bradley's GuardPLC I/O modules meet all safety requirements through their safety functions/safety loops. The 1753-IF8XOF4 module has been tested according to IEC 61508 standards and.
For certain product configurations, only safety-isolated devices powered by a 24V DC power supply can be connected. Users must connect the device to a power supply compliant with PELV (Protective Extra Low Voltage) or SELV (Safety Isolation Extra Low Voltage) standards. System cycle time includes reading local inputs, writing local outputs, test procedures, communication methods, and processing. According to the specifications, under all conditions, the maximum response time of GuardPLC is twice the system cycle time.
The 1753-IF8XOF4 Allen Bradley Analog Combination Module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Allen Bradley 1753-IF8XOF4 Analog Combination Module Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 1753-IF8XOF4 module is a distributed safety I/O module designed for use with GuardPLC controllers. This module features 8 safety analog inputs and 4 standard analog outputs. It communicates with the GuardPLC controller via the GuardPLC Ethernet interface.
Safety Level: Suitable for safety mechanical applications requiring a maximum safety level of SIL 3 (IEC 61508) or 4 when integrated into a GuardPLC system.
Environment: Suitable for Class 2 contaminated industrial environments with altitudes up to 2000 meters.
Protection Level: This module is an "open" device and must be installed in an IP20 protection enclosure in standard applications.
