Overview
Manuals
Cable Selection
Rack Matching
Startup Testing
Features:
- Interconnect Cables for the documented Bently Nevada 7200 transducer cabling.
- Cable Length Option in feet: 6 ft (1.8 m).
- Frequency Response: 10 Hz to 15 kHz or 30 Hz to 10 kHz.
16710-06 belongs to the Bently Nevada 7200 transducer cabling and performs the documented interconnect cables role in the Bently Nevada 7200 proximity transducer system. The retained technical evidence records Cable Length Option in feet: 6 ft (1.8 m); Frequency Response: 10 Hz to 15 kHz or 30 Hz to 10 kHz; Temperature Sensitivity: -11% to +3% typical. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Bently Nevada 7200 transducer cabling receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 16710-06 Interconnect Cables is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
16710-06 Bently Nevada product documentation and selection resources.
Important Notice: The uploaded PDF documents the listed model or its identified Bently Nevada product family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Cable Selection: 16710-06 performs the interconnect cables function within the Bently Nevada 7200 transducer cabling. The retained documentation identifies cable length option in feet as 6 ft (1.8 m); apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Rack Matching: approve 16710-06 only for the documented Bently Nevada 7200 proximity transducer system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Startup Testing: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 16710-06.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
