Fast Quote About Us FAQ Contact Us
  • Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Fast Quote About Us FAQ Contact Us
      Request a Parts Quote
      Name
      Company *
      Phone *
      Email *
      Address
      City
      State / Province / Region
      Zipcode
      Country
      Quantity *
      Part Number *
      Manufacturer
      Preferred Condition
      Additional Information
      Cancel
      Bently Nevada 190501-10-00-00
      Bently Nevada 190501-10-00-00

      • ISO 9001:2015 Certified

        Our quality management system covers sourcing,testing and dispatch

      • View Our Success Stories

        Real stories from real customer orders
      In Stock
      Ships by Monday, September 7
      Fast Shipping Available
      Low-frequency velocity transducer

      190501-10-00-00

      Product Information:

      A compact piezo-velocity transducer with 100 mV/in/s sensitivity, a 1.5 Hz to 10 kHz broad response and a 3 to 900 Hz ±1 dB band. The 10 mounting option is an M6 plate stud with a 3/8-24 adapter, while 00 specifies the MIL-C-5015 connection and no agency approval.

      Product image is representative; revision or series may vary. Contact us to request a specific version.
      Get a Quote
      • One-year warranty
      • Global shipping
      • Exact-model verification
      WhatsApp: +86 180 2077 6792 Email parts team
      01


      Model Verified

      Model, revision and nameplate reviewed
      02


      Email confirmation

      You will get an email confirming that we have received your enquiry
      03


      Dedicated Account Manager

      One of our team will be in touch to confirm your part(s) specification and condition
      04


      Your quote

      You will receive a comprehensive quote tailored to your specific needs
        • PRODUCT OVERVIEW

          What is this product?

          Bently Nevada 190501-10-00-00 is the Velomitor CT low-frequency casing-velocity transducer configured with mounting option 10, connection option 00 and approval option 00. It converts machine-casing motion into a velocity-proportional signal with 100 mV/in/s sensitivity. The documented ±1 dB operating band is 3 to 900 Hz, while the broader ±3 dB response extends from 1.5 Hz to 10 kHz. The compact 316L stainless-steel body uses a two-pin MIL-C-5015 top connector and can be mounted in any orientation on a properly prepared surface. Option 10 provides an M6 x 1 plate stud together with a 3/8-24 adapter. Selection must preserve the complete mounting, connector and approval code and must consider machine frequency, surface preparation, cable length and the connected monitoring input.

          Source boundary

          Manufacturer reference: official product datasheet and ordering information for 190501 Velomitor CT.
        • APPLICATIONS

          Where it may be used

          Use this exact Velomitor CT configuration where low-frequency casing velocity, compact stainless-steel construction and the documented stud/connector combination match the installation.

          Slow-roll vibration

          Tracks low-frequency casing motion on machines whose operating band reaches down to the documented 3 Hz response.

          Bearing-housing trends

          Provides a velocity-proportional signal from a rigid bearing housing for alarms and condition trends.

          Compact skid monitoring

          Fits restricted mounting areas that accept the M6 stud or supplied 3/8-24 adapter and top connector.

          Long field-cable loops

          Supports remote monitoring-panel connections when the documented cable requirements and 305 m limit are observed.
      Technical specifications for

      190501-10-00-00

      0 TECHNICAL PARAMETERS
      • Manufacturer:
        Bently Nevada
      • Product Category:
        Sensor
      • Product family:
        190501 Velomitor CT
      • Measurement:
        Low-frequency casing velocity
      • Sensitivity:
        3.94 mV/mm/s (100 mV/in/s) ±5%
      • Frequency response:
        3 to 900 Hz ±1 dB
      • Broadband response:
        1.5 Hz to 10 kHz ±3 dB
      • Velocity range:
        63.5 mm/s peak
      • Output bias voltage:
        10.1 VDC ±1 V
      • Maximum cable length:
        305 m
      • Mounting option 10:
        M6 x 1 plate stud with 3/8-24 adapter
      • Connection option 00:
        2-pin MIL-C-5015 interface
      • Approval option 00:
        No agency approval
      • Operating temperature:
        -40 to +85 °C
      • Case material:
        316L stainless steel
      • Mounting orientation:
        Any orientation
      • Minimum mounting resonance:
        9 kHz
      • Stock:
        27
      Ask for Quote
      WHAT HAPPENS NEXT?

      From enquiry to delivery

      Six clear steps show what information is required and what the written quotation will contain.
      • 01

        Find the product

        Search the part number or send an inquiry for obsolete, discontinued or hard-to-find parts.
      • 02

        Provide the details

        Share the exact part number, quantity, condition, revision, destination and any required certificates or photos.
      • 03

        Review the quotation

        Receive price, currency, condition, availability, warranty, lead time, shipping terms and quotation validity in writing.
      • 04

        Confirm the order

        Accept the quotation in writing and complete the required payment before shipment.
      • 05

        Pay by bank transfer

        Pay the full invoiced amount by bank wire in RMB/CNY, GBP, EUR or USD using the official invoice details.
      • 06

        Verify and dispatch

        The part is inspected, tested and securely packed before dispatch, with tracking provided after release.
      Request a Verified Quote
      BUYER INFORMATION

      Product condition level information

      Commercial details are confirmed in writing before payment.
      • 01

        Factory Sealed

        Unused product with the original factory seal intact; packaging age or storage marks may still be present.

        view
      • 02

        Original Pack

        Unused product in original manufacturer packaging that was not originally factory sealed.

        view
      • 03

        Factory New

        New and current product sourced through the manufacturer or authorized supply channel when expressly confirmed in the quotation.

        view

      Alternative Names

      190501 10 00 00 190501-10-00-00 Low-frequency velocity transducer 190501 Velomitor CT 190501-10-00-00 190501-10-00-00 complete order code

      Information

      Overview Manuals Signal Interface Mounting Practice Frequency Selection

      Features:

      • The piezo-velocity design provides 100 mV/in/s sensitivity with a 3-to-900 Hz ±1 dB measurement band.
      • A compact 316L stainless-steel case, two-pin MIL-C-5015 connector and any-orientation mounting support industrial casing measurements.
      • Ordering blocks 10-00-00 preserve the M6 stud/adapter hardware, connection interface and no-approval configuration required for an exact replacement.
      Bently Nevada 190501-10-00-00 is the Velomitor CT low-frequency casing-velocity transducer configured with mounting option 10, connection option 00 and approval option 00. It converts machine-casing motion into a velocity-proportional signal with 100 mV/in/s sensitivity. The documented ±1 dB operating band is 3 to 900 Hz, while the broader ±3 dB response extends from 1.5 Hz to 10 kHz. The compact 316L stainless-steel body uses a two-pin MIL-C-5015 top connector and can be mounted in any orientation on a properly prepared surface. Option 10 provides an M6 x 1 plate stud together with a 3/8-24 adapter. Selection must preserve the complete mounting, connector and approval code and must consider machine frequency, surface preparation, cable length and the connected monitoring input.

      Manufacturer reference: official 190501 Velomitor CT documentation.

      Moore Automated supports exact-item verification and spare-part enquiries for 190501-10-00-00.
      Bently Nevada 190501-10-00-00 Low-frequency velocity transducer manual (Datasheet), Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

      Use the 100 mV/in/s scale and verify the approximately 10.1 VDC bias, connector polarity and receiving-channel input before commissioning.

      Prepare the required surface, use the documented stud/adapter, apply 4.5 N·m torque and prevent cable or connector side loading.

      Confirm that important casing-vibration components lie within the 3-to-900 Hz ±1 dB band and that the monitor bandwidth is compatible.

      Technical notes

      Maintain the complete 190501-10-00-00 identity when selecting a replacement. Prepare a flat 33 mm diameter mounting surface, use 4.5 N·m mounting torque and avoid impacts above the stated shock limit. The output bias is approximately 10.1 VDC and the connected monitor must accept the 100 mV/in/s signal and required power arrangement. Verify the machine’s lowest significant frequency against the 3 Hz ±1 dB response, keep the cable route within the documented 305 m maximum and check connector polarity before commissioning.

      Velomitor Code Check

      I need to confirm 190501-10-00-00 on the nameplate, including mounting hardware 10, connection interface 00 and approval 00. If the code is unclear, I will send close photographs of the label, connector and installed stud.

      My Velocity-Sensor Request

      For my quotation I will provide quantity, the complete 190501-10-00-00 code, label and connector photographs, machine type, expected frequency range, monitoring input, destination country and required delivery date.

      Customs & Shipping Data

      • Product dimensions
        Documented item dimensions
        8.2 x 3.3 x 3.3 cm
      • Product weight
        Documented net weight
        Approx. 0.297 kg
      • HS / customs code
        Indicative HS code 9031809090
        Final destination-specific classification requires customs confirmation.
      • Country of origin
        USA (verify the supplied-item marking)
        Confirm the actual item marking and available manufacturer documentation.
      • Ships from
        Xiamen, Fujian, China
        Dispatch location is confirmed in the written quotation.
      • Customs documents
        Confirmed for the destination
        Available document scope is agreed before shipment.
      PRODUCT & ORDER FAQS

      Questions buyers ask about 190501-10-00-00

      • How do I confirm that my 190501 transducer is the 10-00-00 build for 190501-10-00-00?

        Check the full label: 10 is the M6 plate stud with 3/8-24 adapter, the first 00 is the MIL-C-5015 interface and the final 00 means no agency approval.

      • Can I use my existing monitor with 190501-10-00-00?

        Confirm that its input powers and reads the documented 100 mV/in/s velocity signal and accepts the approximately 10.1 VDC bias. Also verify connector pinout and cable length.

      • Can I order a new original 190501-10-00-00 with a one-year warranty?

        Yes. Moore Automated supplies the quoted exact item as new original stock with a one-year independent-supplier warranty. Identification and condition photographs are checked before dispatch, and the written quotation records the covered part number.

      • Will my machine frequency fall inside this sensor's useful band for 190501-10-00-00?

        Compare the expected casing-vibration spectrum with the documented 3 to 900 Hz ±1 dB band; the broad ±3 dB response is 1.5 Hz to 10 kHz.

      • How should I prepare my mounting point for this Velomitor CT for 190501-10-00-00?

        Provide the documented 33 mm diameter surface, use the correct M6 stud or supplied adapter, tighten to about 4.5 N·m and keep the connector free of side load.

      • What signal level should I expect from my transducer for 190501-10-00-00?

        Nominal sensitivity is 3.94 mV/mm/s, equivalent to 100 mV/in/s, with a velocity range of 63.5 mm/s peak.

      • May I send my target price for the 190501-10-00-00?

        Yes. Share your target price, quantity and delivery country. A clear target lets Moore Automated request the most relevant discount efficiently and return a comparable quotation for the exact item.

      • How can I reserve the exact no-approval version in stock for 190501-10-00-00?

        Ask for current quantity and a photograph showing the complete 10-00-00 suffix. A unit with approval option 01 through 04 is not the same configuration.
      All FAQ
      MORE PARTS IN THE SAME PROJECT?

      Search another part number

      Use the exact manufacturer number where possible.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          SEE PRODUCTS IN SEARCH PAGE ()
          WHY BUYERS WORK WITH MOORE AUTOMATED

          Clear checks before you commit

          Product-specific verification and written commercial details help purchasing and maintenance teams reduce mismatch risk.

          • Pre-shipment inspection

            Products are inspected before dispatch to verify model, condition and applicable specifications.

          • Documentation available

            Product photos, packaging photos, certificates and datasheets can be provided when available.

          • Clear commercial terms

            Condition, warranty, lead time, included items and shipping terms are stated clearly in writing.

          • 20+ years of experience

            Over 20 years of experience in industrial automation and hard-to-source legacy parts.

          • Product Lifecycle Stage

            OEM-documented / Confirm current availability

            Moore Automated supplies high-quality Bently Nevada replacement modules and spare parts matched to 190501-10-00-00. Exact-item verification and practical sourcing support help reduce equipment downtime.

          Related Products

          Browsing history

          Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
          Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.

          Get a quick price for：

          190501-10-00-00
          Quantity
          Upload
          (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
          Get a Quote
          For more information on how your data is processed and stored by Moore Automated please read our privacy policy.
          img0
          img0