Overview
Manuals
Compatibility Review
Field Installation Notes
Configuration Breakdown
Features:
- 200350 constant-current accelerometers: 200350-12-00-CN belongs to the documented manufacturer product family.
- Configuration: mounting option 12 for an M8 x 1.25 adhesive stud, tolerance option 00 at 100 mV/g ±20%, and CN country approval.
- Verification: Confirm all 12-00-CN suffixes, M8 adhesive mounting, sensitivity tolerance, approval, cable, and direct-input channel before replacement.
Bently Nevada 200350-12-00-CN is general-purpose case-mounted accelerometer with m8 adhesive stud mount designed for Trendmaster Pro constant-current direct-input monitoring channels. According to the official manufacturer documentation, it converts machine-case acceleration into a 100 mV/g voltage signal for vibration monitoring. The ordering identity records mounting option 12 for an M8 x 1.25 adhesive stud, tolerance option 00 at 100 mV/g ±20%, and CN country approval, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 200350-12-00-CN are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the constant-current input, 18 to 28 Vdc excitation, 2 to 20 mA current, cable connector, mounting surface, and approval.
The Bently Nevada 200350-12-00-CN general-purpose case-mounted accelerometer with M8 adhesive stud mount is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 200350-12-00-CN general-purpose case-mounted accelerometer with M8 adhesive stud mount manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Compatibility Review
Confirm the constant-current input, 18 to 28 Vdc excitation, 2 to 20 mA current, cable connector, mounting surface, and approval. Compare the complete 200350-12-00-CN ordering code and nameplate data with the installed item before purchase.
Field Installation Notes
Follow the manufacturer instructions and verify adhesive mounting preparation, M8 stud, orientation, 2-pin connector, cable shielding, and channel power. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Configuration Breakdown
mounting option 12 for an M8 x 1.25 adhesive stud, tolerance option 00 at 100 mV/g ±20%, and CN country approval. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
