Overview
Manuals
Mounting Interface
Environmental Limits
Signal Commissioning
Features:
- Piezoelectric accelerometer using a ceramic shear element inside a welded hermetic stainless-steel housing.
- Top-mounted 2-pin MIL-C-5015 connector, 1/4-28 female mount and IP68 protection support documented machinery installations.
- Official limits include -54 to +121 °C operation, 5000 g shock resistance, output impedance below 150 ohms and greater than 10^8 ohm case isolation.
200350-02-00-01 Bently Nevada 200350-02-00-01 is a piezoelectric accelerometer built around a ceramic shear sensing element in a welded hermetic stainless-steel housing. It uses a top-mounted 2-pin MIL-C-5015 connector, a 1/4-28 female mounting interface and IP68 environmental protection. Official specifications include an operating range from -54 to +121 °C, 5000 g shock resistance, output impedance below 150 ohms, two-second maximum settling time and case isolation above 10^8 ohms.
Official source: Bently Nevada 200350 Accelerometer Datasheet 164804 identifies the construction, connector, mounting, environmental and electrical specifications for this sensor family.
200350-02-00-01 accelerometer documentation and verified Moore Automated resources.
Important Notice: Confirm the complete sensor code, mounting, cable and signal-conditioning channel before installation.
Prepare a flat mounting surface and use the documented 1/4-28 female interface and approved stud arrangement. Confirm sensor orientation and prevent connector or cable loading from disturbing the measurement.
Use the sensor only within the documented -54 to +121 °C range and IP68 installation conditions. Inspect the welded housing, connector seal and cable before exposure to the operating environment.
Connect the 2-pin MIL-C-5015 interface to the verified cable and monitoring channel. Confirm settling, baseline signal and channel response, then record the final orientation and configuration.
