Overview
Manuals
Gap Control
Rack Matching
Startup Testing
Features:
- Velocity Seismoprobe Transducer for the documented Bently Nevada Seismoprobe velocity transducers.
- Sensitivity: 20 mV/mm/s (500 mV/in/s).
- Sensitivity Temperature Coefficient: 0.2%/°C.
24646-06-04-03 belongs to the Bently Nevada Seismoprobe velocity transducers and performs the documented velocity seismoprobe transducer role in the Bently Nevada Seismoprobe velocity transducers. The retained technical evidence records Sensitivity: 20 mV/mm/s (500 mV/in/s); Sensitivity Temperature Coefficient: 0.2%/°C; Dynamic operating range: 2.54 mm (0.100 in) peak to peak maximum displacement.. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Bently Nevada Seismoprobe velocity transducers receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 24646-06-04-03 Velocity Seismoprobe Transducer is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
24646-06-04-03 Bently Nevada product documentation and selection resources.
Important Notice: The uploaded PDF documents the listed model or its identified Bently Nevada product family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Gap Control: 24646-06-04-03 performs the velocity seismoprobe transducer function within the Bently Nevada Seismoprobe velocity transducers. The retained documentation identifies sensitivity as 20 mV/mm/s (500 mV/in/s); apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Rack Matching: approve 24646-06-04-03 only for the documented Bently Nevada Seismoprobe velocity transducers. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Startup Testing: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 24646-06-04-03.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
