Overview
Manuals
Monitoring Functions
Signal Compatibility
Installation Checks
Features:
- The documented value for sensitivity is 100 mV/g (10 mV per m/s2); use this value when checking the monitor configuration, operating limits and expected measurement response.
- The documented value for power is Nominal consumption of 3 watts (excluding accelerometers); retain this specification when matching the exact dual accelerometer monitor and installed Bently Nevada 3300 hardware.
- The documented value for output impedance (voltage outputs) is 100 Ω. Minimum load resistance is 10 k Ω; use this value when checking the monitor configuration, operating limits and expected measurement response.
3300/25 is a Bently Nevada Dual Accelerometer Monitor for the 3300 system. It supports the specified vibration or position function in a matched 3300 channel. Key specifications: Sensitivity: 100 mV/g (10 mV per m/s2); Power: Nominal consumption of 3 watts (excluding accelerometers). Match the full order code and hardware before replacement.
Confirm the complete 3300/25 order code, installed signal chain, mounting arrangement and commissioning record before replacement.
The 3300/25 Bently Nevada Dual Accelerometer Monitor may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 3300/25 Dual Accelerometer Monitor reference links
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 3300/25 only with the documented signal type and connection arrangement. Retained facts: Sensitivity: 100 mV/g (10 mV per m/s2); Power: Nominal consumption of 3 watts (excluding accelerometers); Output Impedance (voltage outputs): 100 Ω. Minimum load resistance is 10 k Ω. Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
