Overview
Manuals
Mounting Depth
Connector Match
Gap Calibration
Features:
- 3300 XL 8 mm Proximity Probe for the documented 3300 XL 8 mm Proximity Transducer System.
- Probe Tip Diameter: 8 mm.
- Thread: M10 × 1.
330104-10-20-10-02-00 belongs to the 3300 XL 8 mm Proximity Transducer System and performs the documented 3300 xl 8 mm proximity probe role in the Bently Nevada 3300 XL 8 mm proximity measurement system. The retained technical evidence records Probe Tip Diameter: 8 mm; Thread: M10 × 1; Unthreaded Length: 100 mm. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the 3300 XL 8 mm Proximity Transducer System receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 330104-10-20-10-02-00 3300 XL 8 mm Proximity Probe is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Bently Nevada 330104-10-20-10-02-00 3300 XL 8 mm Proximity Probe Manual(Datasheets), Link
Important Notice: The uploaded PDF documents 330104-10-20-10-02-00 or its identified manufacturer product family. Confirm the complete order code, hardware execution and installed-system requirements before replacement.
Mounting Depth: 330104-10-20-10-02-00 is documented as a 3300 xl 8 mm proximity probe. Its probe tip diameter is 8 mm; retain the complete suffix string when checking the physical execution.
Compare mounting, connector keying and cable routing with the installed assembly before removal.
Connector Match: pair 330104-10-20-10-02-00 only with the documented Bently Nevada 3300 XL 8 mm proximity measurement system. The retained thread is M10 × 1.
Confirm every connected probe, cable, sensor, fan duct, motor circuit or starter load from the applicable drawing before substitution.
Gap Calibration: the recorded unthreaded length for 330104-10-20-10-02-00 is 100 mm.
After installation, restore the approved settings and supply sequence, review status or signal quality, and complete the product-specific functional test before release.
