Overview
Manuals
Modified Sensor Build
System Compatibility
Installation Approval
Features:
- The documented value for proximitor sensor input is Accepts one non-contacting 3300-series 5 mm, 3300 XL 8 mm Proximity Probe and Extension Cable; retain this specification when matching the exact 3300 xl proximitor sensor and installed Bently Nevada 3300 hardware.
- The documented value for power requires is -17.5 Vdc to -26 Vdc; retain this specification when matching the exact 3300 xl proximitor sensor and installed Bently Nevada 3300 hardware.
- The documented value for supply sensitivity is Less than 2 mV change in output voltage per volt change in input voltage.; use this value when checking the monitor configuration, operating limits and expected measurement response.
330180-X1-CN MOD: 145004-13 is a Bently Nevada 3300 XL Proximitor Sensor for the 3300 system. It supports the specified vibration or position function in a matched 3300 channel. Key specifications: Power Requires: -17.5 Vdc to -26 Vdc; Output Resistance: 50 Ω. Match the full order code and hardware before replacement.
Confirm the complete 330180-X1-CN MOD: 145004-13 order code, installed signal chain, mounting arrangement and commissioning record before replacement.
The exact 330180-X1-CN MOD: 145004-13 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330180-X1-CN MOD: 145004-13 3300 XL Proximitor Sensor manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 330180-X1-CN MOD: 145004-13 only with the documented signal type and connection arrangement. Retained facts: Proximitor Sensor Input: Accepts one non-contacting 3300-series 5 mm, 3300 XL 8 mm Proximity Probe and Extension Cable; Power Requires: -17.5 Vdc to -26 Vdc; Supply Sensitivity: Less than 2 mV change in output voltage per volt change in input voltage.. Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
