Overview
Manuals
Integrated Transducer
Standoff Integration
Plugged Conduit Layout
Features:
- The documented value for probe and approvals is 3300 XL 8 mm probe with Multiple Approvals; the complete approval suffix must match the installation area and site requirements.
- The documented value for standoff adapter is 2.0 in (50.8 mm); retain this specification when matching the exact proxpac xl proximity transducer assembly and installed Bently Nevada 3300 hardware.
- The documented value for probe penetration is 3.8 in (96.5 mm); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
330880-28-20-038-00-02 is a Bently Nevada PROXPAC XL Proximity Transducer Assembly for the 3300 system. It supports the specified vibration or position function in a matched 3300 channel. Key specifications: Probe and Approvals: 3300 XL 8 mm probe with Multiple Approvals; Standoff Adapter: 2.0 in (50.8 mm). Match the full order code and hardware before replacement.
Confirm the complete 330880-28-20-038-00-02 order code, installed signal chain, mounting arrangement and commissioning record before replacement.
The exact 330880-28-20-038-00-02 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330880-28-20-038-00-02 PROXPAC XL Proximity Transducer Assembly manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 330880-28-20-038-00-02 only with the documented signal type and connection arrangement. Retained facts: Probe and Approvals: 3300 XL 8 mm probe with Multiple Approvals; Standoff Adapter: 2.0 in (50.8 mm); Probe Penetration: 3.8 in (96.5 mm). Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
