Overview
Manuals
Signal Conditioning
Probe & Cable Match
Bias Commissioning
Features:
- The documented special configuration is X0; retain this specification when matching the exact 3300 xl 50 mm proximitor sensor and installed Bently Nevada 3300 hardware.
- The documented agency approval is 00 - No approvals; the complete approval suffix must match the installation area and site requirements.
- The documented system linear range is 27.9 mm; use this value when checking the monitor configuration, operating limits and expected measurement response.
330878-X0-00 MOD: 177889-01 is a Bently Nevada 3300 XL 50 mm Proximitor Sensor for the 3300 system. It supports the specified vibration or position function in a matched 3300 channel. Key specifications: Special configuration: X0; Agency approval: 00 - No approvals. Match the full order code and hardware before replacement.
330878-X0-00 MOD:177889-01 is a special-configuration 3300 XL 50 mm Proximitor Sensor. The standard family supports a 27.9 mm linear range and 394 mV/mm nominal scale factor, while the X0 and MOD 177889-01 details remain controlled by the manufacturer configuration.
The exact 330878-X0-00 MOD: 177889-01 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330878-X0-00 MOD: 177889-01 3300 XL 50 mm Proximitor Sensor manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Use 330878-X0-00 MOD: 177889-01 only with the documented signal type and connection arrangement. Retained facts: Special configuration: X0; Agency approval: 00 - No approvals; System linear range: 27.9 mm. Confirm power, polarity, connector and monitor input before connection.
Match the 3300 system family, calibrated length or sensitivity, connected sensor/probe and monitor channel. Preserve the complete option and approval code.
Check supply and bias, review monitor diagnostics, test the affected measurement path and compare response with the recorded baseline before enabling alarms or trips.
