Overview
Manuals
Order Code
System Matching
Commissioning
Features:
- Exact 330904-00-05-05-01-IN Bently Nevada order identity.
- Documented 3300 nsv proximity probe configuration.
- Replacement requires complete installed-system matching.
330904-00-05-05-01-IN is an armored metric 3300 NSv proximity probe with M8 x 1 thread, 0 mm unthreaded length, 50 mm case length and 0.5 m total length. The IN approval suffix is not one of the standard 00 or 05 codes in the cited public ordering table and must be matched to the supplied nameplate and manufacturer record.
Before replacement, record the complete label, installed position, mounting or cable arrangement, receiving channel and retained settings. After installation, verify the signal baseline, diagnostics and every affected monitoring or protection function.
The Bently Nevada 330904-00-05-05-01-IN 3300 NSv Proximity Probe is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
330904-00-05-05-01-IN Bently Nevada product manual and reference links.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
330904-00-05-05-01-IN is an armored metric 3300 NSv proximity probe with M8 x 1 thread, 0 mm unthreaded length, 50 mm case length and 0.5 m total length. The IN approval suffix is not one of the standard 00 or 05 codes in the cited public ordering table and must be matched to the supplied nameplate and manufacturer record.
Match the mounting geometry, cable or connector execution, receiving monitor, electrical length and approved system documentation. Preserve every installed reference and accessory before removal.
After installation, inspect connector seating and cable routing, verify the saved signal baseline and diagnostics, and prove every affected monitoring or protection function under an approved controlled procedure.
