Fast Quote About Us FAQ Contact Us
  • Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Fast Quote About Us FAQ Contact Us
      Request a Parts Quote
      Name
      Company *
      Phone *
      Email *
      Address
      City
      State / Province / Region
      Zipcode
      Country
      Quantity *
      Part Number *
      Manufacturer
      Preferred Condition
      Additional Information
      Cancel

      • ISO 9001:2015 Certified

        Our quality management system covers sourcing,testing and dispatch

      • View Our Success Stories

        Real stories from real customer orders
      In Stock
      Ships by Sunday, September 27
      Fast Shipping Available
      8mm Eddy Current Sensor

      PR6423/13R-040 CON021

      Product Information:

      PR6423/13R-040 CON021 is a Emerson 8mm eddy current sensor engineered for the Emerson EPRO eddy-current measurement system. It performs the documented 8mm eddy current sensor function within the Emerson EPRO PR 642x hardware architecture, so the complete order code, hardware execution and receiving position must be retained during selection.

      Product-level and manufacturer-family information records linear measurement range: 2 mm (80 mils); initial air gap: 0.5 mm (20 mils); deviation from best fit straight line (dsl): ± 0.025 mm (± 1 mil); minimum shaft diameter: 25 mm (0.79”). Before replacement, compare the installed label, rack or carrier, terminal or connector arrangement, power and signal requirements and approved configuration; after installation, verify diagnostics and every affected control, communication, safety or monitoring path before returning the equipment to service.

      • One-year warranty
      • Global shipping
      • Exact-model verification
      WhatsApp: +86 180 2077 6792 Email parts team
      01


      Model Verified

      Model, revision and nameplate reviewed
      02


      Email confirmation

      You will get an email confirming that we have received your enquiry
      03


      Dedicated Account Manager

      One of our team will be in touch to confirm your part(s) specification and condition
      04


      Your quote

      You will receive a comprehensive quote tailored to your specific needs
        • PRODUCT OVERVIEW

          What is this product?

          PR6423/13R-040 CON021 is a Emerson 8mm eddy current sensor engineered for the Emerson EPRO eddy-current measurement system. It performs the documented 8mm eddy current sensor function within the Emerson EPRO PR 642x hardware architecture, so the complete order code, hardware execution and receiving position must be retained during selection. Product-level and manufacturer-family information records linear measurement range: 2 mm (80 mils); initial air gap: 0.5 mm (20 mils); deviation from best fit straight line (dsl): ± 0.025 mm (± 1 mil); minimum shaft diameter: 25 mm (0.79”). Before replacement, compare the installed label, rack or carrier, terminal or connector arrangement, power and signal requirements and approved configuration; after installation, verify diagnostics and every affected control, communication, safety or monitoring path before returning the equipment to service.

          Selection basis

          Confirm the complete PR6423/13R-040 CON021 identity, receiving hardware, connectors or terminals and approved configuration before replacement.
        • APPLICATIONS

          Where it may be used

          Typical industries for this documented 8mm eddy current sensor execution.

          Water Treatment

          Uses the documented sensing function in treatment and utility skids.

          Material Handling

          Detects qualified targets on conveyor and transfer equipment.

          Position Sensing

          Applies the documented sensing range in industrial position duties.

          OEM Machinery

          Restores the exact sensor execution in approved machine designs.
      Technical specifications for

      PR6423/13R-040 CON021

      0 TECHNICAL PARAMETERS
      • Manufacturer:
        Epro
      • Product Category:
        Sensor
      • Linear Measurement Range:
        2 mm (80 mils)
      • Initial Air Gap:
        0.5 mm (20 mils)
      • Deviation from best fit straight line (DSL):
        ± 0.025 mm (± 1 mil)
      • Minimum Shaft Diameter:
        25 mm (0.79”)
      • Protection Class:
        IP66, IEC 60529
      • Operating Temperature Range:
        -35 to +180°C (-31 to 356°F)
      • Product Type:
        Eddy Current Sensor
      • Stock Availability:
        5
      Ask for Quote
      WHAT HAPPENS NEXT?

      From enquiry to delivery

      Six clear steps show what information is required and what the written quotation will contain.
      • 01

        Find the product

        Search the part number or send an inquiry for obsolete, discontinued or hard-to-find parts.
      • 02

        Provide the details

        Share the exact part number, quantity, condition, revision, destination and any required certificates or photos.
      • 03

        Review the quotation

        Receive price, currency, condition, availability, warranty, lead time, shipping terms and quotation validity in writing.
      • 04

        Confirm the order

        Accept the quotation in writing and complete the required payment before shipment.
      • 05

        Pay by bank transfer

        Pay the full invoiced amount by bank wire in RMB/CNY, GBP, EUR or USD using the official invoice details.
      • 06

        Verify and dispatch

        The item receives a pre-shipment inspection and suitable protective packaging. Functional testing is performed only where appropriate equipment and procedures are available for the specific item. We confirm the applicable inspection scope and provide tracking after dispatch.
      Request a Verified Quote
      BUYER INFORMATION

      Product condition level information

      Commercial details are confirmed in writing before payment.
      • 01

        Factory Sealed

        Unused product with the original factory seal intact; packaging age or storage marks may still be present.

        view
      • 02

        Original Pack

        Unused product in original manufacturer packaging that was not originally factory sealed.

        view
      • 03

        Factory New

        New and current product sourced through the manufacturer or authorized supply channel when expressly confirmed in the quotation.

        view

      Alternative Names

      PR642313R040CON021 PR6423 13R 040 CON021 PR 6423/13 R-040 CON 021 Emerson PR6423/13R-040 CON021 PR6423/13R-040-CON021 PR6423/13R-040 CON021

      Information

      Overview Manuals Sensor Setup System Match Install Checks

      Features:

      • 8mm Eddy Current Sensor for the documented Emerson EPRO eddy-current measurement system.
      • Linear Measurement Range: 2 mm (80 mils).
      • Initial Air Gap: 0.5 mm (20 mils).
      PR6423/13R-040 CON021 is a Emerson 8mm eddy current sensor engineered for the Emerson EPRO eddy-current measurement system. It performs the documented 8mm eddy current sensor function within the Emerson EPRO PR 642x hardware architecture, so the complete order code, hardware execution and receiving position must be retained during selection.

      Product-level and manufacturer-family information records linear measurement range: 2 mm (80 mils); initial air gap: 0.5 mm (20 mils); deviation from best fit straight line (dsl): ± 0.025 mm (± 1 mil); minimum shaft diameter: 25 mm (0.79”). Before replacement, compare the installed label, rack or carrier, terminal or connector arrangement, power and signal requirements and approved configuration; after installation, verify diagnostics and every affected control, communication, safety or monitoring path before returning the equipment to service.

      The PR6423/13R-040 CON021 8mm Eddy Current Sensor is supplied only after the exact hardware identity, condition and current OEM lifecycle status have been confirmed.
      Emerson PR6423/13R-040 CON021 8mm Eddy Current Sensor manuals and technical resources.Important Notice: The linked PDF documents the listed model or its identified product family. Confirm the full order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.

      PR6423/13R-040 CON021 is a Emerson 8mm eddy current sensor engineered for the Emerson EPRO eddy-current measurement system. It performs the documented 8mm eddy current sensor function within the Emerson EPRO PR 642x hardware architecture, so the complete order code, hardware execution and receiving position must be retained during selection.

      The listed parameters are limited to the documented model or product-family evidence. Compare the complete label, receiving hardware, terminal map and connected equipment rather than transferring ratings from a nearby code.

      PR6423/13R-040 CON021 must remain matched to the documented Emerson EPRO eddy-current measurement system installation. Confirm hardware generation, slot or carrier, connector or terminal arrangement, software or configuration dependencies and system drawings before approval.

      Photograph labels and connections before removal and preserve the original position, keying, addressing and channel allocation.

      Isolate the equipment using the approved procedure, verify stored energy is removed and inspect the receiving hardware before fitting PR6423/13R-040 CON021.

      After installation, restore power in the documented sequence, review diagnostics and test every affected signal, relay, network, control, safety or monitoring function against the commissioning record.

      Technical notes

      PR6423/13R-040 CON021 must be selected and serviced as the exact 8mm eddy current sensor identified by its complete hardware marking. Preserve the receiving rack or carrier, connector and terminal assignment, connected equipment, configuration record and any protection or diagnostic dependencies; after installation, verify seating, power, status indications and each affected control, I/O, communication or monitoring path before the equipment is returned to operation.

      Identity Check

      Verify that the supplied item is marked PR6423/13R-040 CON021 and that its hardware form, connectors, terminal blocks, faceplate and printed revision agree with the approved receiving-system record.

      Use photographs of both sides and the installed position to resolve ambiguity before shipment or installation.

      Quote Details

      For an accurate PR6423/13R-040 CON021 quotation, provide quantity, required condition, installed system and slot, connected terminal or cable assemblies and any revision restrictions.

      State whether testing, certificates, matched accessories or a scheduled outage date must be included in the written offer.

      Customs & shipping dimensions / weight

      • Product dimensions
        Confirm from supplied item
        No exact-model record is present in the supplied dimensions-and-weight sheet; measure the supplied item before dispatch.
      • Product weight
        Confirm from supplied item
        No exact-model record is present in the supplied dimensions-and-weight sheet; weigh the supplied item before dispatch.
      • HS / customs code
        9031809090
        Indicative China HS classification for position, proximity or vibration sensor; final classification is confirmed by the customs declarant.
      • Country of origin
        Confirm from supplied item
        Origin is verified against the supplied item and applicable manufacturer documentation.
      • Ships from
        Xiamen, Fujian, China
        The dispatch location is confirmed in the written quotation.
      • Customs documents
        Confirmed for the destination
        Invoice, packing-list and origin-document requirements are agreed with the order.
      PRODUCT & ORDER FAQS

      Questions buyers ask about PR6423/13R-040 CON021

      • How is the exact PR6423/13R-040 CON021 execution identified?

        Use the complete PR6423/13R-040 CON021 marking, including every suffix and companion code, and compare it with the installed hardware record; a shortened base model does not confirm interchangeability.

      • Which function does PR6423/13R-040 CON021 perform?

        PR6423/13R-040 CON021 performs the documented 8mm eddy current sensor role in the Emerson EPRO eddy-current measurement system.

      • Which linear measurement range applies to PR6423/13R-040 CON021?

        The documented linear measurement range is 2 mm (80 mils); confirm it against the exact supplied execution.

      • Which initial air gap should be checked for PR6423/13R-040 CON021?

        Check 0.5 mm (20 mils) for initial air gap and do not import a rating from a nearby part number.

      • Which system must PR6423/13R-040 CON021 match?

        It must match the Emerson EPRO eddy-current measurement system, including the receiving rack or carrier generation, system configuration and connected equipment.

      • Which wiring or connector checks apply to PR6423/13R-040 CON021?

        Compare terminal numbering, connector keying, field supply, grounding, shielding and any paired termination or cable assembly with the approved drawings before removal.

      • How should PR6423/13R-040 CON021 be commissioned after installation?

        Verify seating and wiring first, restore power in the approved sequence, review diagnostics and test every affected channel, network, control, safety or monitoring path.

      • Can another revision replace PR6423/13R-040 CON021 directly?

        Do not assume direct interchangeability. Compare the complete PR6423/13R-040 CON021 code, deviation from best fit straight line (dsl) (± 0.025 mm (± 1 mil)), hardware revision, firmware dependencies and receiving-system documentation.
      All FAQ
      MORE PARTS IN THE SAME PROJECT?

      Search another part number

      Use the exact manufacturer number where possible.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          SEE PRODUCTS IN SEARCH PAGE ()
          WHY BUYERS WORK WITH MOORE AUTOMATED

          Clear checks before you commit

          Product-specific verification and written commercial details help purchasing and maintenance teams reduce mismatch risk.

          • Pre-shipment inspection

            Products are inspected before dispatch to verify model, condition and applicable specifications.

          • Documentation available

            Product photos, packaging photos, certificates and datasheets can be provided when available.

          • Clear commercial terms

            Condition, warranty, lead time, included items and shipping terms are stated clearly in writing.

          • 20+ years of experience

            Over 20 years of experience in industrial automation and hard-to-source legacy parts.

          • Product Lifecycle Stage

            Lifecycle status is confirmed against current manufacturer records at quotation. The exact PR6423/13R-040 CON021 identity, hardware revision and included assemblies are checked against the supplied item.

            Any replacement or migration option is proposed only after the receiving Emerson EPRO eddy-current measurement system, connectors, configuration dependencies and commissioning requirements have been reviewed.

          Related Products

          Browsing history

          Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
          Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.

          Get a quick price for:

          PR6423/13R-040 CON021
          Quantity
          Upload
          (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
          Get a Quote
          For more information on how your data is processed and stored by Moore Automated please read our privacy policy.