Overview
Manuals
Reverse-Mount Design
Compact Signal Path
ClickLoc Connection
Features:
- The documented value for cable type is M10X1 threads; verify the connector interface, electrical length and matching 3300 signal-chain components before commissioning.
- The documented value for total length is 0.5 meter (20 in); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented value for connector is Miniature coaxial ClickLoc connector, standard cable; verify the connector interface, electrical length and matching 3300 signal-chain components before commissioning.
330907-05-30-05-02-00 is a Bently Nevada 3300 NSv Reverse Mount Probe for the 3300 system. It measures shaft vibration or position without contact in a matched transducer chain. Key specifications: Cable type: M10X1 threads; Total Length: 0.5 meter (20 in). Match the full order code and hardware before replacement.
Confirm the complete 330907-05-30-05-02-00 order code, installed signal chain, mounting arrangement and commissioning record before replacement.
The 330907-05-30-05-02-00 Bently Nevada 3300 NSv Reverse Mount Probe may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330907-05-30-05-02-00 3300 NSv Reverse Mount Probe manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Preserve every option block of 330907-05-30-05-02-00. Retained facts: Cable type: M10X1 threads; Total Length: 0.5 meter (20 in); Connector: Miniature coaxial ClickLoc connector, standard cable. Mechanical length, thread, cable/connector and approval suffixes are part of the exact probe identity.
Match probe family, electrical length, extension cable and Proximitor Sensor. Confirm target material, available travel, nearby probe spacing and mounting geometry before exchange.
Set the operating gap from live bias voltage, support the cable above its bend limit and verify runout, vibration or position response against the commissioning baseline.
