Overview
Manuals
Link Setup
Hardware Review
Function Review
Features:
- Network switch with 6 Ethernet for the documented Emerson DeltaV.
- Operating Voltage: 100 - 240V AC, 47 - 63 Hz.
- Power Consumption: 7.2 W – 11.3 W.
FP20-6TX2TX KJ1611X1-BA1 12P4448X032 belongs to the Emerson DeltaV and performs the documented network switch with 6 ethernet role in the Emerson DeltaV distributed control system. The retained technical evidence records Operating Voltage: 100 - 240V AC, 47 - 63 Hz; Power Consumption: 7.2 W – 11.3 W; Protection Class: IP20. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Emerson DeltaV receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The FP20-6TX2TX KJ1611X1-BA1 12P4448X032 Network switch with 6 Ethernet is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Emerson FP20-6TX2TX KJ1611X1-BA1 12P4448X032 Network switch with 6 Ethernet Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Link Setup: FP20-6TX2TX KJ1611X1-BA1 12P4448X032 performs the network switch with 6 ethernet function within the Emerson DeltaV. The retained documentation identifies operating voltage as 100 - 240V AC, 47 - 63 Hz; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Hardware Review: approve FP20-6TX2TX KJ1611X1-BA1 12P4448X032 only for the documented Emerson DeltaV distributed control system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Function Review: isolate the equipment, remove stored energy and inspect the receiving hardware before installing FP20-6TX2TX KJ1611X1-BA1 12P4448X032.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
