Overview
Manuals
Control Strategy
Hardware Review
Final Checks
Features:
- Deltav M3 Controller module for the documented Emerson DeltaV.
- Power Rating: 24 VDC at 350 mA Max.
- Ambient Temperature: -40 °C to +60 °C.
KJ2002X1-BA1 12P1442X062 VE3002 belongs to the Emerson DeltaV and performs the documented deltav m3 controller module role in the Emerson DeltaV distributed control system. The retained technical evidence records Power Rating: 24 VDC at 350 mA Max; Ambient Temperature: -40 °C to +60 °C; Shock: 10 g half-sine wave for 11 ms. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Emerson DeltaV receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The KJ2002X1-BA1 12P1442X062 VE3002 Deltav M3 Controller module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Emerson KJ2002X1-BA1 12P1442X062 VE3002 Deltav M3 Controller module Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Control Strategy: KJ2002X1-BA1 12P1442X062 VE3002 performs the deltav m3 controller module function within the Emerson DeltaV. The retained documentation identifies power rating as 24 VDC at 350 mA Max; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Hardware Review: approve KJ2002X1-BA1 12P1442X062 VE3002 only for the documented Emerson DeltaV distributed control system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Final Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing KJ2002X1-BA1 12P1442X062 VE3002.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
