Overview
Manuals
Identity Evidence
Order Controls
Technical Boundary
Features:
- Sensitivity/Linearity: The documented 16mm eddy current sensor specification is 4 V/mm (101.6 mV/mil) ≤ ±1.5%; verify it against the supplied label before installation.
- Air Gap (Center): The documented 16mm eddy current sensor specification is Approx. 2.7 mm (0.11”) Nominal; verify it against the supplied label before installation.
- Long Term Drift: The documented 16mm eddy current sensor specification is < 0.3%; verify it against the supplied label before installation.
The PR6424/000-100 CON021 Emerson 16mm eddy current sensor performs its documented automation, interface, control or monitoring duty within the DeltaV platform. Its correct operation depends on the relationship between the installed hardware, connected field equipment and approved system configuration. Complete model identification reduces the risk of connector, channel and revision mismatches during maintenance.
Before installing PR6424/000-100 CON021, compare the full product label, installed position, terminal or connector arrangement, paired assemblies, firmware or logic requirements and available project records. After replacement, review diagnostics and function-test every affected control, protection, communication or field-signal path before returning the equipment to service.
The PR6424/000-100 CON021 Emerson 16mm Eddy Current Sensor is identified as Active / Available from OEM. Current availability, revision and supplied scope are confirmed in the written quotation.
Emerson PR6424/000-100 CON021 documentation and reference links.
Important Notice: The linked information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
Verify that the supplied item is marked PR6424/000-100 CON021 and that its 16mm eddy current sensor form, connectors and revision agree with the approved DeltaV receiving record.
For PR6424/000-100 CON021, state the required condition, quantity, installed position, connected assemblies and document requirements in the written enquiry.
Apply only parameters supported by the exact PR6424/000-100 CON021 record or a documented family source. Do not infer electrical ratings or interchangeability from appearance.
