Overview
Manuals
Identity Evidence
Order Controls
Technical Boundary
Features:
- Measurement Range: Supports the documented 2 mm / 80 mils linear range specification in the approved Emerson Process Automation configuration.
- Initial Air Gap: The documented reverse-mount eddy-current displacement probe specification is 0.5 mm / 20 mils; verify it against the supplied label before installation.
- Scale Factor: The documented reverse-mount eddy-current displacement probe specification is 8 V/mm ±5% from 0 to 45°C; verify it against the supplied label before installation.
The PR6423/03R-012-ZD Emerson reverse-mount eddy-current displacement probe performs its documented automation, interface, control or monitoring duty within the Emerson Process Automation platform. Its correct operation depends on the relationship between the installed hardware, connected field equipment and approved system configuration. Complete model identification reduces the risk of connector, channel and revision mismatches during maintenance.
Before installing PR6423/03R-012-ZD, compare the full product label, installed position, terminal or connector arrangement, paired assemblies, firmware or logic requirements and available project records. After replacement, review diagnostics and function-test every affected control, protection, communication or field-signal path before returning the equipment to service.
The PR6423/03R-012-ZD Emerson Reverse-mount eddy-current displacement probe is identified as Active / Available from OEM. Current availability, revision and supplied scope are confirmed in the written quotation.
Emerson PR6423/03R-012-ZD documentation and reference links.
Important Notice: The linked information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
Verify that the supplied item is marked PR6423/03R-012-ZD and that its reverse-mount eddy-current displacement probe form, connectors and revision agree with the approved Emerson Process Automation receiving record.
For PR6423/03R-012-ZD, state the required condition, quantity, installed position, connected assemblies and document requirements in the written enquiry.
Apply only parameters supported by the exact PR6423/03R-012-ZD record or a documented family source. Do not infer electrical ratings or interchangeability from appearance.
