Overview
Manuals
Supply Function
Integration Fit
Function Review
Features:
- Power Regulator Board for the documented GE Mark V and Mark VI Speedtronic.
- Hardware Role: Power Regulator Board.
- Receiving System: Approved GE Mark V or Mark VI Speedtronic position.
531X133PRUAMG1 belongs to the GE Mark V and Mark VI Speedtronic and performs the documented power regulator board role in the GE Speedtronic Mark V and Mark VI turbine-control architecture. The retained technical evidence records Hardware Role: Power Regulator Board; Receiving System: Approved GE Mark V or Mark VI Speedtronic position; Interface Basis: Matching connectors, terminal boards and rack hardware. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the GE Mark V and Mark VI Speedtronic receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 531X133PRUAMG1 Power Regulator Board is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
GE 531X133PRUAMG1 Power Regulator Board Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Supply Function: 531X133PRUAMG1 performs the power regulator board function within the GE Mark V and Mark VI Speedtronic. The retained documentation identifies hardware role as Power Regulator Board; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Integration Fit: approve 531X133PRUAMG1 only for the documented GE Speedtronic Mark V and Mark VI turbine-control architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Function Review: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 531X133PRUAMG1.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
