Overview
Manuals
Reflective Memory Architecture
Optical Port Configuration
Network Integration
Features:
- Eight installed multimode SFP transceivers with no single-mode transceivers.
- Managed 2 Gb/s reflective-memory star network with automatic bypass and signal regeneration.
- Rack-mount or desktop enclosure with Ethernet and RS-232 management interfaces.
ACC-5595-208 is the eight-multimode-port execution of the VMIACC-5595 hub family. The full -208 suffix controls the installed optical transceiver mix and must not be confused with the -280 single-mode execution.
Before replacement, record the full part number, installed transceivers, fiber type and polarity, port map, 1x8 or 2x4 grouping, detect and bypass modes, IP settings, serial settings, rack hardware and network-node configuration. After installation, verify every optical path and deterministic data route.
The ACC-5595-208 General Electric eight-port multimode reflective-memory hub is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
General Electric ACC-5595-208 documentation and reference links.
Important Notice: Confirm the complete order identity, hardware execution, receiving-system configuration and required document revision before replacement.
The managed hub supports the 2 Gb/s VMIxxx-5565 reflective-memory network and can operate as one eight-port group or two four-port groups.
Suffix -208 identifies eight multimode optical transceivers. Match the LC fiber type, polarity and installed SFP execution.
Restore the approved port grouping, IP and serial settings, then test signal detection, automatic bypass and every connected node.
