Registered Address: 32D Floor Guomao Building, No.388, Hubin South Road, Siming District, Xiamen,Fujian, China

IC200CPU005 is a GE versamax cpu module engineered for the GE VersaMax PLC system. It performs the documented versamax cpu module function within the GE VersaMax hardware architecture, so the complete order code, hardware execution and receiving position must be retained during selection.
Verify that the supplied item is marked IC200CPU005 and that its versamax cpu module form, connectors and revision agree with the approved GE VersaMax receiving record.
For IC200CPU005, state the required condition, quantity, installed position, connected assemblies and document requirements in the written enquiry.
Apply only parameters supported by the exact IC200CPU005 record or a documented family source. Do not infer electrical ratings or interchangeability from appearance.
IC200CPU005 technical scope: User Memory: 128 KB configurable memory; Boolean Execution: 0.8 ms per 1K instructions, typical; Serial Port 1: RS-232; Serial Port 2: RS-485; Clock Accuracy: 23 ppm at 30 °C.
Use these values only for the listed hardware execution and verify the supplied label before installation.
Match IC200CPU005 to the approved GE VersaMax receiving position, connector or terminal arrangement and configuration record.
After power restoration, review diagnostics and test the affected versamax cpu module path.
Obsolete/Discontinued by OEM
IC200CPU005 is a General Electric versamax cpu module associated with the GE VersaMax platform. It supports the documented controller execution, communications and configuration functions assigned to the installed processor position. Correct selection depends on the complete model code, connector or terminal arrangement, hardware revision and receiving-system configuration. Before replacement, compare the original product label, installed slot or cabinet reference, connected assemblies and approved project records. After installation, review system diagnostics and function-test every affected channel, control path, protection function or communication link before returning the equipment to service.