Overview
Manuals
Board Setup
System Context
System Testing
Features:
- Pneumatic Damper Actuator for the documented Honeywell MP900 pneumatic actuators.
- Effective diaphragm area (cm2 ): 45 cm2.
- Stroke (mm): 100 mm.
MP913C1066-1 belongs to the Honeywell MP900 pneumatic actuators and performs the documented pneumatic damper actuator role in the Honeywell pneumatic damper-control architecture. The retained technical evidence records Effective diaphragm area (cm2 ): 45 cm2; Stroke (mm): 100 mm; At 0 bar pressure and zerostroke position: 80 N. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Honeywell MP900 pneumatic actuators receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The MP913C1066-1 Pneumatic Damper Actuator is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Honeywell MP913C1066-1 Pneumatic Damper Actuator Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Board Setup: MP913C1066-1 performs the pneumatic damper actuator function within the Honeywell MP900 pneumatic actuators. The retained documentation identifies effective diaphragm area (cm2 ) as 45 cm2; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
System Context: approve MP913C1066-1 only for the documented Honeywell pneumatic damper-control architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
System Testing: isolate the equipment, remove stored energy and inspect the receiving hardware before installing MP913C1066-1.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
