Overview
Manuals
Lead Matching
Interface Review
System Testing
Features:
- Term panel with cable for the documented Triconex fault-tolerant safety systems.
- Operating Temperature: 32° to 140° F (0° to 60° C).
- Storage Temperature: -40° to 167° F (-40° to 75° C).
4000188-310 belongs to the Triconex fault-tolerant safety systems and performs the documented term panel with cable role in the Triconex Tricon and Trident safety architecture. The retained technical evidence records Operating Temperature: 32° to 140° F (0° to 60° C); Storage Temperature: -40° to 167° F (-40° to 75° C); Relative Humidity: 5% to 95%, non-condensing. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Triconex fault-tolerant safety systems receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 4000188-310 Term panel with cable is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
4000188-310 Triconex product documentation and selection resources.
Important Notice: The uploaded PDF documents the listed model or its identified Triconex product family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Lead Matching: 4000188-310 performs the term panel with cable function within the Triconex fault-tolerant safety systems. The retained documentation identifies operating temperature as 32° to 140° F (0° to 60° C); apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Interface Review: approve 4000188-310 only for the documented Triconex Tricon and Trident safety architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
System Testing: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 4000188-310.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
