Overview
Manuals
Hardware Role
Rack Review
Startup Review
Features:
- TP270 Touch Panel for the documented SIMATIC HMI.
- Design of display: STN, 256 colors.
- Current consumption (rated value): 0.6 A.
6AV6545-0CA10-0AX0 belongs to the SIMATIC HMI and performs the documented tp270 touch panel role in the Siemens SIMATIC operator-panel architecture. The retained technical evidence records Design of display: STN, 256 colors; Current consumption (rated value): 0.6 A; Active power input, typ.: 15 W. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the SIMATIC HMI receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 6AV6545-0CA10-0AX0 TP270 Touch Panel is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Siemens 6AV6545-0CA10-0AX0 TP270 Touch Panel Manual(Datasheets), Link
Important Notice: The uploaded PDF documents 6AV6545-0CA10-0AX0 or its identified product family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Hardware Role: 6AV6545-0CA10-0AX0 performs the tp270 touch panel function within the SIMATIC HMI. The retained documentation identifies design of display as STN, 256 colors; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Rack Review: approve 6AV6545-0CA10-0AX0 only for the documented Siemens SIMATIC operator-panel architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Startup Review: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 6AV6545-0CA10-0AX0.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
